Analisis Postur Kerja Pada Proses Pemasangan Gas Cng Di PT. Surya Pamenang Menggunakan Metode RULA Dan REBA

Authors

  • Risky Ilham Wardana Progam Studi Teknik Industri, Fakultas Teknik, Universitas Kadiri
  • Sri Rahayuningsih Progam Studi Teknik Industri, Fakultas Teknik, Universitas Kadiri
  • Lolyka Dewi Indrasari Progam Studi Teknik Industri, Fakultas Teknik, Universitas Kadiri

DOI:

https://doi.org/10.30737/jatiunik.v5i1.2039

Keywords:

RULA, REBA, CNG, Nordic Body Maps

Abstract

PT. Surya Pamenang is a company engaged in the paper industry located in kediri – East Java. In the company requires fuel that is CNG gas. In the process of use, conventional installation is needed by understanding ergonomic movement posture. The purpose of this study to find out the most dominant complaints in CNG gas installation workers was reviewed from the results of nordic body maps questionnaire processing and the recommendation of improving safe working posture based on the results of RULA and REBA scores for workers in the CNG gas installation section. Data collection is done by means of the dissemination of Nordic Body Maps questionnaires and the provision of recommendations for improvement of safe working posture based on the results of RULA and REBA scores for workers in the CNG gas installation section. Data collection is done by distributing Nordic Body Maps questionnaires to CNG gas installation workers. The results of the study were complaints from the most dominant workers on the installation of CNG gas at the opening of the CNG gas door, valve opening and condensate cleaning, namely on the upper neck, lower neck, right shoulder, back, waist, left calf. The recommendation given is to be given lubricant and remove rust - rust, continuous energy when turning the valve and liver , accompanied by standing every 10 minutes to reduce back and waist pain, cube-shaped climbing is needed, extensive addition is needed to the CNG gas door area and relaxation and rungs amounting to 6 units to facilitate the work.

 

PT. Surya Pamenang adalah perusahaan yang bergerak dibidang industri kertas yang berada di wilayah Kediri – Jawa Timur. Didalam perusahaan tersebut membutuhkan bahan bakar yaitu gas CNG. Didalam proses penggunaannya diperlukan pemasangan secara konvensional dengan memahami postur gerakan yang ergonomi. Tujuan penelitian ini untuk mengetahui keluhan yang paling dominan pada pekerja pemasangan gas CNG ditinjau dari hasil pengolahan kuisioner Nordic Body Maps dan pemberian rekomendasi perbaikan postur kerja yang aman berdasarkan hasil skor RULA dan REBA bagi pekerja pada bagian pemasangan gas CNG. Pengumpulan data dilakukan dengan cara penyebaran kuesioner Nordic Body Maps kepada pekerja pemasangan gas CNG. Hasil dari penelitian adalah keluhan dari pekerja paling dominan pada pemasangan gas CNG pada bagian pembukaan pintu gas CNG, pembukaan valve dan pembersihan kondensat yaitu pada bagian tubuh leher bagian atas, leher bagian bawah, bahu kanan, punggung, pinggang, betis kiri. Rekomendasi yang diberikan adalah diberikan pelumas dan dihilangkan karat – karat, tenaga yang kontinu saat memutar valve dan hati – hati, diiringi berdiri setiap 10 menit untuk mengurangi nyeri punggung dan pinggang, diperlukan panjatan berbentuk kubus, diperlukan penambahan luas pada area pintu gas CNG dan dilakukan relaksasi dan anak tangga berjumlah 6 unit untuk mempermudah pekerjaan. 

References

S. R. Widodo, “Evaluasi Ergonomi Partisipatori pada Layanan Kesehatan di RSAU dr. M. Salamun,†Institut Teknologi bandung, 2017.

H. dan Y. Iridiastadi, Ergonomi Suatu Pengantar, 4th ed. Bandung: PT. Remaja Rosdakarya, 2017.

D. P. Restuputri, “Metode REBA Untuk Pencegahan Musculoskeletal Disorder Tenaga Kerja,†J. Tek. Ind., vol. 18, no. 1, p. 19, 2017, doi: 10.22219/jtiumm.vol18.no1.19-28.

M. Andriani, “Identifikasi Postur Kerja Secara Ergonomi Untuk Menghindari Musculoskeletal Disorders,†Semin. Nas. Tek. Ind. [SNTI2017] Lhokseumawe-Aceh, pp. 13–14, 2017.

L. D. Indrasari and S. Rahayuningsih, “PERANCANGAN ALAT PENYARING TAHU SECARA ERGONOMIS,†Tek. Ind. Univ. Kadiri, pp. 1219–1229, 2017.

V. Golchha, P. Sharma, J. Wadhwa, D. Yadav, and R. Paul, “Ergonomic risk factors and their association with musculoskeletal disorders among Indian dentist: A preliminary study using Rapid Upper Limb Assessment,†Indian J. Dent. Res., 2015, doi: 10.4103/0970-9290.152202.

Y. Kurniawan, “Analisis dan Usulan Perbaikan Stasiun Kerja Menggunakan Metode RULA, REBA dan Nordic Body Map,†Progr. Stud. Tek. Ind., 2018.

Y. K. Kong, S. yong Lee, K. S. Lee, and D. M. Kim, “Comparisons of ergonomic evaluation tools (ALLA, RULA, REBA and OWAS) for farm work,†Int. J. Occup. Saf. Ergon., 2018, doi: 10.1080/10803548.2017.1306960.

H. Iridiastadi and Yassierli, Ergonomi Suatu Pengantar, 1st ed. Bandung: Remaja Rosdakarya, 2015.

NIOSH, “Applications Manual For The Revised NIOSH Lifting Equation,†www.cdc.gov/niosh, 1994. .

E. Muslimah, I. Pratiwi, and F. Rafsanjani, “Analisis Manual Material Handling,†J. Ilm. Tek. Ind., vol. V, no. 2, pp. 53–60, 2006.

B. M. Deros, D. D. I. Daruis, and I. M. Basir, “A Study on Ergonomic Awareness among Workers Performing Manual Material Handling Activities,†Procedia - Soc. Behav. Sci., vol. 195, pp. 1666–1673, 2015, doi: 10.1016/j.sbspro.2015.06.238.

G. Naik and M. R. Khan, “Prevalence of MSDs and Postural Risk Assessment in Floor Mopping Activity Through Subjective and Objective Measures,†Saf. Health Work, vol. 11, no. 1, pp. 80–87, 2020, doi: 10.1016/j.shaw.2019.12.005.

W. Y. Abdel Wahed and S. K. Hassan, “Prevalence and associated factors of stress, anxiety and depression among medical Fayoum University students,†Alexandria J. Med., vol. 53, no. 1, pp. 77–84, 2017, doi: 10.1016/j.ajme.2016.01.005.

B. A. Putri, “The Correlation between Age, Years of Service, and Working Postures and the Complaints of Musculoskeletal Disorders,†Indones. J. Occup. Saf. Heal., vol. 8, no. 2, p. 187, 2019, doi: 10.20473/ijosh.v8i2.2019.187-196.

Tiara and S. Perdana, “Analisis Beban Kerja Fisiologi Pada Proses Produksi Pembuatan Rumah Boneka Dengan Pekerja Penyandang Disabilitas,†Oper. Excell. J. Appl. Ind. Eng., vol. 11, no. 1, p. 98, 2019, doi: 10.22441/oe.v.10.3.2018.020.

Y. H. Yadi, L. M. Kurniawidjaja, and I. H. Susilowati, “Ergonomics Intervention Study of the RULA/REBA Method in Chemical Industries for MSDs’ Risk Assessment,†KnE Life Sci., vol. 4, no. 5, p. 181, 2018, doi: 10.18502/kls.v4i5.2551.

P. Plantard, H. P. H. Shum, A. S. Le Pierres, and F. Multon, “Validation of an ergonomic assessment method using Kinect data in real workplace conditions,†Appl. Ergon., 2017, doi: 10.1016/j.apergo.2016.10.015.

M. Yusuf, N. Adiputra, I. D. P. Sutjana, and K. Tirtayasa, “The Improvement of Work Posture Using RULA (Rapid Upper Limb Assessment) Analysis to Decrease Subjective Disorders of Strawberry Farmers in Bali,†Int. Res. J. Eng. IT Sci. Res., vol. 2, no. 9, p. 1, 2016, doi: 10.21744/irjeis.v2i9.163.

R. Ghozalis, “RULA dan REBA,†blogspot.vom, 2014. .

P. Y. Dhiya and D. M. Rahmah, “Mental Workload and Ergonomic Analysis on Production Departement At PT. XYZ,†J. Ind. Inf. Technol. Agric., vol. 2, no. 1, pp. 1–11, 2019, doi: 10.24198/jiita.v2i1.17720.

I. A. Khan and R. K. Deb, “Postural analysis through RULA, REBA and QEC of vendors selling edible items at railway stations and in the trains,†Int. J. Eng. Adv. Technol., vol. 9, no. 1, pp. 7269–7277, 2019, doi: 10.35940/ijeat.A9878.109119.

R. Wahyuniardi and D. M. Reyhanandar, “Penilaian Postur Operator Dan Perbaikan Sistem Kerja Dengan Metode Rula Dan Reba,†J@ti Undip J. Tek. Ind., vol. 13, no. 1, p. 45, 2018, doi: 10.14710/jati.13.1.45-50.

I. Agusta, “Teknik Pengumpulan dan Analisis Data Kualitatif,†J. Stud. Komun. dan Media, vol. 02, no. 1998, pp. 1–11, 2014.

Downloads

PlumX Metrics

Published

2021-10-01

How to Cite

Wardana, R. I., Rahayuningsih, S., & Indrasari, L. D. (2021). Analisis Postur Kerja Pada Proses Pemasangan Gas Cng Di PT. Surya Pamenang Menggunakan Metode RULA Dan REBA. JATI UNIK : Jurnal Ilmiah Teknik Dan Manajemen Industri, 5(1), 56–66. https://doi.org/10.30737/jatiunik.v5i1.2039

Issue

Section

Articles

Most read articles by the same author(s)

1 2 > >>