Desain Perkerasan Jalan Sumberboto - Gununggede Blitar Menggunakan Metode Manual Desain

Uminarsih Uminarsih(1*), Yosef Cahyo Setianto Poernomo(2), Agata Iwan Candra(3), Fajar Romadhon(4),

(1) Faculty of Engineering, Kadiri University
(2) Faculty of Engineering, Kadiri University
(3) Faculty of Engineering, Kadiri University
(4) Faculty of Engineering, Kadiri University
(*) Corresponding Author

Abstract


The road is an access that connects an area with other areas. With the road, mobility will be easier so that it has an impact on increasing or stabilizing the economy. The Sumberboto-Gunung Gede Blitar road section is one of the access roads to Tambakrejo beach tourism. To improve comfort and safety for road users, it is necessary to improve road quality. This study aims to plan the pavement on the Sumberboto-Gunung Gede Blitar road section. The planning is carried out on the condition of the heavily damaged pavement, with a service life of more than 10 years, the width of the road is 4 meters, the length of the road is 6 kilometers, the type of collector road is class II, and the type of pavement is laston. The planning carried out includes the addition of roads in the hills of Blitar Regency, the data used includes the condition of the sections on the road with calculations referring to the Design Manual Number 02/M/BM/2013 road pavement. The planning results obtained road construction with flexible pavement, with a specification of a surface layer of 10 cm, a layer of 20 cm for the top foundation, 25 cm for the bottom layer of the foundation. From this plan, a total budget of Rp. 13,572,808,084.00 (thirteen billion five hundred seventy-two million eight hundred thousand rupiah) is required. With these results, it can be used as a reference in realizing road construction on the Sumberboto-Gunung Gede Blitar road section.


Keywords


Construction; Flexible Pavement; Manual Design; Road

Full Text:

PDF Similarity

References


M. R. S. Mshali and W. J. Steyn, “Incorporating truck speed effect on evaluation and design of flexible pavement systems,” Int. J. Pavement Res. Technol., vol. 13, no. 1, pp. 55–63, 2020.

R. R. Dhana and N. A. Putra, “Alternatif Penggunaan Kerikil Gunung Pegat Sebagai Bahan Perkerasan Jalan Raya,” UKaRsT, vol. 3, no. 2, pp. 131–139, 2019.

E. Gardjito, “Study Perencanaan Geometrik, Perkerasan Jalan Dan Perencanaan Anggaran Biaya Pada Jalan Raya Kalidawir – Ds. Ngubalan Kec. Kalidawir,” UKaRsT, vol. 1, no. 2, p. 11, 2017, doi: 10.30737/ukarst.v1i2.264.

J. Jalur, L. Selatan, and G. Duwet, “Studi Perencanaan Peningkatan Jalan Pada Ruas Jalan Jalur Lintas Selatan Giriwoyo – Duwet Sta. 10+000 – Sta. 15+000,” J. Manaj. Teknol. Tek. Sipil, vol. 2, no. 1, pp. 39–50, 2019.

A. Gunarto, F. Nursandah, M. Zaenuri, N. A. Affandy, U. Kadiri, and U. I. Lamongan, “Perencanaan Sistem Drainase Ruas Jalan Kuncir – Sawahan Kabupaten Nganjuk,” UKaRsT, vol. 1, no. 2, pp. 156–164, 2017.

S. S. Razouki, R. Al-muhanna, and Z. Hashim, “Average full-trailer truck equivalency factors for uphill flexible pavements in developing countries,” Int. J. Pavement Eng., pp. 1–15, 2020, doi: 10.1080/10298436.2020.1859507.

A. I. C. Wisnu Arganata, Artur Daniel Limantara, Yosef Cahyo SP, “Analisis Perencanaan Overlay Pada Ruas Jalan Craken-Ngulungkulon Nambak-Ngulungkulon Dengan Bahan Acl Pada Sta 0.00-13.345 Kecamatan Munjungan Kabupaten Trenggalek,” J. Manaj. Teknol. Tek. Sipil, vol. 2, no. 1, pp. 121–131, 2019.

P. R. Nahak, Y. Cahyo, and S. Winarto, “Studi Perencanaan Tebal Perkerasan Konstruksi Jalan Raya (Menggunakan Metode Bina Marga) Pada Ruas Jalan Umasukaer Di Kabupaten Malaka,” J. Manaj. Teknol. Tek. Sipil, vol. 2, no. 1, pp. 75–85, 2019.

Y. Fu, Y. Li, Y. Tan, and C. Zhang, “Dynamic response analyses of snow-melting airport rigid pavement under different types of moving loads,” Road Mater. Pavement Des., vol. 20, no. 4, pp. 1–21, 2018, doi: 10.1080/14680629.2017.1421253.

A. Bianchini, C. R. Gonzalez, H. P. Bell, A. Bianchini, C. R. Gonzalez, and H. P. B. Correction, “Correction for the asphalt overlay thickness of flexible pavements considering pavement conditions,” Int. J. Pavement Eng., vol. 19, no. 7, pp. 577–585, 2018, doi: 10.1080/10298436.2016.1198480.

M. B. Basha, D. Ph, and M. Asce, “Reliability Perspective on Optimum Design of Flexible Pavements for Fatigue and Rutting Performance,” J. Transp. Eng. Part B Pavements, vol. 145, no. 2, pp. 1–12, 2019, doi: 10.1061/JPEODX.0000108.

G. R. Mahajan, B. Radhika, and K. P. Biligiri, “A critical review of vehicle-pavement interaction mechanism in evaluating flexible pavement performance characteristics,” Road Mater. Pavement Des., pp. 1–35, 2020, doi: 10.1080/14680629.2020.1860806.

E. V Uglova and A. N. Tiraturyan, “Interlayer Bond Evaluation in the Flexible Pavement Structures Using a Nondestructive Testing Method,” Procedia Eng., vol. 150, no. 863, pp. 1791–1796, 2016, doi: 10.1016/j.proeng.2016.07.172.

K. P. Umum and D. J. B. Marga, “Manual Desain Perkerasan Jalan,” Jakarta: Binamarga, 2013.

K. PUPR, “Manual Desain Perkerasan jalan,” in Jakarta: Binamarga, 2017.

N. A. Affandi and R. Hepiyanto, “Studi Evaluasi Tebal Perkerasan Kaku Pada Ruas Jalan Dradah – Kedungpring Mengunakan Metode Bina Marga 2002,” UKaRsT, vol. 2, no. 2, p. 7, 2018, doi: 10.30737/ukarst.v2i2.265.

K. A. Abaza, “Optimum flexible pavement life-cycle analysis model,” J. Transp. Eng., vol. 128, no. 6, pp. 542–549, 2002, doi: 10.1061/(ASCE)0733-947X(2002)128:6(542).

H. Rahman and R. T. Zega, “Analisis Kesesuaian Model Modulus Aspal dan Campuran Laston Lapis Aus untuk Aspal Modifikasi Asbuton Murni,” J. Tek. Sipil ITB, vol. 25, no. 1, pp. 71–80, 2018, doi: 10.5614/jts.2018.25.1.9.

F. Andriansyah P, S. Winarto, Y. C. Setianto Poernomo, and A. I. Candra, “Analisa Tebal Perkerasan Lentur Pada Rencana Peningkatan Jalan Ruas Legundi – Pertigaan Bunder,” J. Manaj. Teknol. Tek. Sipil, vol. 2, no. 2, p. 322, 2019, doi: 10.30737/jurmateks.v2i2.541.

Y. J. Zhang, Y. Li, and X. Chen, “Dynamic var planning for receiving ends based on evaluation of state division/transition cost,” Huanan Ligong Daxue Xuebao/Journal South China Univ. Technol. (Natural Sci., vol. 37, no. 2, pp. 33–45, 2009.

S. Sukirman, Perkerasan Lentur Jalan Raya,. 1999.

M. R. Putra and N. A. Affandy, “Perbandingan Estimasi Anggaran Biaya Dengan Metode SNI Dan BOW,” J. CIVILA, vol. 2, no. 1, 2017, doi: 10.30736/cvl.v2i1.41.

D. Fachrurrazi, C. Anwar, and A. Hasan, “Rencana Anggaran Biaya dan Metode Pelaksanaan pada Proyek Pembangunan Jembatan Lamnyong Kota Banda Aceh,” J. Sipil Sains Terap., vol. 1, no. 1, 2017.

J. Harmawanto, Y. C. S. P, and S. Winarto, “Analisa Anggaran Biaya Danpenjadwalanproyek Perbaikan Tanggul Kali Bakungdesa Cengkok Kecamatan Tarokan Kabupaten Kediri,” J. Manaj. Teknol. Tek. Sipil, vol. 2, no. 2, pp. 224–235, 2019.

H. Prasetiyo, Y. C. S. Poernomo, and A. I. Candra, “Studi Perencanaan Perkerasan Lentur Dan Rencana Anggaran Biaya (Pada Proyek Ruas Jalan Karangtalun–Kalidawir Kabupaten Tulungagung),” J. Manaj. Teknol. Tek. Sipil, vol. 3, no. 2, pp. 347–361, 2020.




DOI: http://dx.doi.org/10.30737/jurmateks.v4i2.2080

Article Metrics

Abstract view : 253 times
PDF - 103 times Similarity - 10 times

Refbacks

  • There are currently no refbacks.


EMAIL : jurmateks@unik-kediri.ac.id


 

Lisensi Creative Commons
JURMATEKS is licensed under a Creative Commons Attribution 4.0 International License.