KRITERIA IDENTIFIKASI BAHAYA, PENILAIAN DAN PENGENDALIAN RISIKO DEPARTEMEN FABRIKASI PT UNINDO PASIFIK

Authors

  • Poniman Poniman Program Studi Teknik Industri, Universitas Muhammadiyah Surabaya
  • Sri Amaliah Mandati Program Studi Teknik Industri, Universitas Muhammadiyah Surabaya

DOI:

https://doi.org/10.30737/jatiunik.v4i1.955

Keywords:

Hazard, Occupational Health And OTP, Risk Assessment, Safety

Abstract

Health and safety risk assessment of PT Unido Pasifik Fabrication department to create a safe and efficient and productive work environment. The fabrication department is the main pillar of company support. The purpose of this study was to analyze the potential hazards in the Production department especially the PT Unindo Pasifik Fabrication Department. In addition this study aims to determine the relationship of knowledge of workers about the potential danger with the behavior of the use of personal protective equipment. This research is an observational descriptive study in which the object of research is the machine, attitude or behavior of the workforce, work processes and work environment. Based on hazard identification, risk assessment and control, there are several hazards and risks that occur with tolerable risk, moderate risk and sustainable risk criteria. Hazard control has been carried out at PT. Unindo Pasifik that is administrative control and the provision of personal protective equipment (PPE). And while the Objective, Target and Program (OTP) are set namely reducing work accidents and reducing occupational diseases in the Fabrication department.

Didalam penilaian risiko kesehatan dan keselamatan departemen Fabrikasi PT Unido Pasifik untuk menciptakan lingkugan kerja aman dan efisien serta produktif. Departemen fabrikasi merupakan penopang kegitaan perusahaan yang utama. Tujuan penelitian ini untuk menganalisis potensi bahaya di bagian Produksi khususnya Departemen Fabrikasi PT Unindo Pasifik. Selain itu penelitian ini bertujuan untuk mengetahui hubungan pengetahuan pekerja tentang potensi bahaya dengan perilaku penggunaan alat pelindung diri. Penelitian ini merupakan penelitian deskriptif observasional dimana Objek penelitian adalah mesin, sikap atau perilaku tenaga kerja, proses kerja dan lingkungan kerja. Berdasarkan identifikasi bahaya, penilaian dan pengendalan risiko terdapat beberapa bahaya dan risiko yang terjadi dengan kriteria tolerable risk, moderate risk dan sustainable risk. Pengendalian bahaya sudah dilakukan di PT. Unindo Pasifik yaitu pengendalian bersifat administrative & penyediaan alat pelindung diri (APD). Dan sedangkan Objective, Target dan Program (OTP) yang ditetapkan yaitu mengurangi kecelakaan kerja dan diharapkan dapat mengurangi penyakit yang ditimbulkan akibat kerja di deprtemen fabrikasi tersebut.

References

E. Henri Ponda, “IDENTIFIKASI BAHAYA, PENILAIAN DAN PENGENDALIAN RISIKO KESELAMATAN DAN KESEHATAN KERJA (K3) PADA DEPARTEMEN FOUNDRY PT. SICAMINDO, jurnal teknik industri heuristtic Vol. 16 no. 2, hal. 62-74 . untag,†pp. 62–74, 2019.

E. Ngatijo, “PENILAIAN RESIKO K3 PADA PENGUJIAN KANDUNGAN URANIUM MENGGUNAKAN ALAT TITROPROSESOR, jurnal No. 16/Tahun IX. Pusat Teknologi Bahan Bakar Nuklir Badan Tenaga Nuklir Nasional, Serpong, Banten, Indonesia,†no. 16, pp. 44–57, 2016.

A. Y. Tripariyanto, “Penerapan Metode HIRA dan Fishbone Diagram Pada Praktek Siswa SMK Yang Menimbulkan Risiko Kecelakaan Kerja Pada Bengkel Ototronik SMK, jurnal JATI UNIK, 2020, Vol.3, No.2,Hal :74-86,†vol. 3, no. 2, pp. 74–86, 2020.

E. Feris Hanafi, “HAZARD IDENTIFICATION, RISK ASSESSMENT, AND RISK CONTROLAT VEHICLE BODY CONSTRUCTION AUTOMOTIVE WORKSHOPENGINEERING FACULTY UNY , jurnal pendidikan teknik otomotif edisiXVI, No.2,†pp. 46–54, 2016.

E. M. Triwibowo, Cecep & Pusphandini, “Kesehatan Lingkungan Dan K3. Yogyakarta: Nuha Medika,†no. 50, p. 18001, 2013.

P. N. 5. tahun 2012, “Peraturan Pemerintah No. 50 Tahun 2012 ‘Penerapan Sistem Manajemen K3’.,†no. 50, p. 2012, 2012.

L. F. and A. S. Wahyuningsih, “‘Penerapan Sistem Manajemen Keselamatan dan Kesehatan Kerja (SMK3) di PT. Ahmadaris,’ HIGEIA (Journal Public Heal. Res. Dev., vol. 1, no. 1, pp. 29–35,†vol. 1, no. 1, p. 2017, 2017.

O. E. Williamson et al., “CAPACIDADES DINÂMICAS COMO DIFERENCIAL ESTRATÉGICO PARA A SUSTENTABILIDADE,†J. Bus. Res., 2016.

A. C. Ahmad, I. N. M. Zin, M. K. Othman, and N. H. Muhamad, “Hazard Identification, Risk Assessment and Risk Control (HIRARC) Accidents at Power Plant,†MATEC Web Conf., vol. 66, pp. 1–6, 2016.

P. Pradhan, “A HIRARC MODEL FOR SAFETY AND RISK AT I nternational J ournal of E ngineering R esearches and M anagement S tudies,†IJERMS, vol. 3, no. 6, pp. 23–34, 2016.

Gunawan, “Manajemen Keselamatan Operasi. Jakarta: Kompas Gramedia.,†p. 2016, 2016.

R. Soehatman, “Manajemen Kebakaran. Jakarta: Dian Rakyat.,†p. 2010, 2010.

C. D. Sucipto, “Keselamatan dan Kesehatan Kerja. Yogyakarta: Gosyen Publishing,†no. 50, p. 18001, 2014.

P. K. Marhavilas, M. Filippidis, G. K. Koulinas, and D. E. Koulouriotis, “A HAZOP with MCDM based risk-assessment approach: Focusing on the deviations with economic/health/environmental impacts in a process industry,†Sustain., vol. 12, no. 3, 2020.

T. Abbasi and S. A. Abbasi, “Role of HAZOP in assessing risk of accidents in chemical process industries : capability and lacunae,†vol. 7, no. December 1984.

S. Zare, M. R. Baneshi, R. Hemmatjo, S. Ahmadi, M. Omidvar, and B. F. Dehaghi, “The Effect of Occupational Noise Exposure on Serum Cortisol Concentration of Night-shift Industrial Workers: A Field Study,†Saf. Health Work, vol. 10, no. 1, pp. 109–113, 2019.

A. Musyafa and H. Adiyagsa, “Hazard and Operability study in Boiler System of The Steam Power Plant,†Int. J. Sci. Technol. (IJSTE), vol. 1, no. 3, pp. 1–10, 2012.

Vishwas H SG D Gidwani, “Hazards Identification and Risk Assessment in Metro Railway Line Construction Project at Hyderabad,†Int. J. Eng. Res., vol. V6, no. 08, pp. 243–249, 2017.

P. Baybutt, “A critique of the Hazard and Operability (HAZOP) study,†J. Loss Prev. Process Ind., 2015.

S. Rahayuningsih and J. A. Pradana, “Identifikasi Penerapan Dan Pemahaman Kesehatan Dan Keselamatan Kerja Dengan Metode Hazard And Operability Study (Hazop) Pada UMKM Eka Jaya,†JATI UNIK J. Ilm. Tek. dan Manaj. Ind., vol. 2, no. 1, p. 20, 2019.

sugiyono, Metode Penelitian Kuantitatif, Kualitatif Dan R&D. Bandung : CV Alfabeta. 2016.

A.Maksum, “Data, Teknik Pengumpulan Data dan Instrumen Penelitian,†J. Cakrawala Kependidikan,†2012.

Downloads

PlumX Metrics

Published

2020-10-30

How to Cite

Poniman, P., & Mandati, S. A. (2020). KRITERIA IDENTIFIKASI BAHAYA, PENILAIAN DAN PENGENDALIAN RISIKO DEPARTEMEN FABRIKASI PT UNINDO PASIFIK. JATI UNIK : Jurnal Ilmiah Teknik Dan Manajemen Industri, 4(1), 28–39. https://doi.org/10.30737/jatiunik.v4i1.955

Issue

Vol. 4 No. 1 (2020): October

Section

Articles

License

Information regarding Copyright and Licensing at JATI UNIK as follows:

  1. Licensed Use of Non - Commercial Articles will be governed by the Creative Commons Attribution license, which is featured on the Creative Commons Attribution Non-Commercial Share A Like 4.0 International License.
  2. The author guarantees that the articles published through JATI UNIK are original and do not contain statements that violate the law do not violate others' rights are subject to copyright, which is held exclusively by the author and free from the rights of third parties. The author is allowed to quote from various sources used for research and not to harm any party.
  3. JATI UNIK disseminates articles published with the rules set by Creative Commons. UNIK JATI license allows users to copy, distribute, display, and work for non-commercial purposes. Users also need to connect authors and JATI UNIK with the distribution of articles in journals.
  4. The Author rights, namely copyrights, ownership rights, patents, rights to use the substance of articles in the future, rights to reproduce articles for personal purposes and not to be traded, rights to conduct personal archives, rights to contract used for the non-exclusive distribution of articles published in the form a book and acknowledge the initial publication of the article originating from JATI UNIK.
  5. Suppose articles published by the author through JATI UNIK are compiled with other authors. In that case, it is necessary to create a form containing the authority of all authors involved in the article's production by including the agreement agreed upon by all authors in the article.
  6. The next point is, the agreement can be terminated if the author or JATI UNIK violates the agreement and cannot make repairs to the customer within a maximum of 2 months after being given information asking for the violation to be corrected. If there is no violation of the agreement, the license will automatically terminate and affect UNIQUE JATI UNIK.
  7. Regarding royalties, so far, if it is following applicable legal regulations, the author will waive his right to collect royalties on articles that have been licensed by JATI UNIK.
  8. In publishing the article, the editorial process is successful. JATI UNIK will continue it. JATI UNIK has the right to adjust articles related to punctuation, spelling, capital letters, references used, and usage adapted to JATI UNIK. The author acknowledges that the article can be published and accessed free of charge by the public.