Analisis Angka Kecelakaan Kerja Dengan Metode Statistik Kecelakaan Kerja Di PT. XYZ
DOI:
https://doi.org/10.30737/jatiunik.v5i2.2450Keywords:
Accident, Safe-T-Score, WorkAbstract
PT XYZ is a company engaged in manufacturing and also one of the State-Owned Enterprises (BUMN) that produces urea and ammonia fertilizers. Work accidents that have occurred at PT XYZ in 2018-2019 are 9 cases of work accidents such as being sprayed with carbamate, hit by a hammer, hit by a splash of aqueous ammonia. The purpose of this study was to determine the level of frequency, severity and Safe-T-Score. In this study, the calculation of the number of work accidents used is the frequency of stating accidents that occur every 1,000,000 working hours, severity stating the loss of working days every 1,000,000 working hours, Safe T Score aims to compare the results of the frequency of accidents. From the results of the research, the frequency level in 2018 was 3.42 and 2019 was 1.05 accidents every 1,000. 000 working hours so the frequency of accidents is getting lower from year to year. The severity level in 2018-2019 is 0 days, this is because PT XYZ has never experienced a work accident that has eliminated working hours. The 2019 Safe-T-Score result is -1763.07, this indicates that the frequency of work accidents shows an improving condition from the previous year.
PT XYZ adalah salah satu Badan Usaha Milik Negara (BUMN) yang memproduksi pupuk urea dan amonia. Kecelakaan kerja yang pernah terjadi pada tahun 2018-2019 ialah 9 kasus kecelakaan kerja seperti Tersembur karbamat, terkena martil, terkena percikan aquos ammonia. Tujuan dari penelitian ini adalah untuk mengetahui tingkat frekuensi, severity dan Safe-T-Score. Dalam penelitian ini perhitungan angka kecelakaan kerja yang di gunakan adalah frekuensi menyatakan kecelakaan yang terjadi setiap 1.000.000 jam kerja, severity menyatakan hilangnya hari kerja setiap 1.000.000 jam kerja, Safe T Score bertujuan membandingkan hasil tingkat frekuensi kecelakaan. Dari hasil penelitian tingkat frekuensi tahun 2018 adalah 3,42 dan 2019 adalah 1,05 kali terjadi kecelakaan setiap 1.000.000 jam kerja jadi frekuensi kecelakaan semakin rendah dari tahun ke tahun. Tingkat severity pada tahun 2018-2019 adalah 0 hari, Hal ini di karenakan PT XYZ tidak pernah mengalami kecelakaan kerja yang sampai menghilangkan jam kerja. Hasil Safe-T-Score tahun 2019 adalah -1763,07 hal ini menunjukkan bahwa frekuensi kecelakaan kerja menunjukkan keadaan yang membaik dari tahun sebelumnya.
References
R. Iskandar and N. D. Jayanto, “Analisis pengaruh kemampuan dalam
mengoperasikan dan memanfaatkan teknologi terhadap kinerja karyawan,†vol. 2, no.
, 2022.
V. Isliko, N. Budiharti, and E. Adriantantri, “ANALISIS KEBISINGAN
PERALATAN PABRIK DALAM UPAYA DAN MENINGKATKAN KINERJA
KARYAWAN DI PT . WANGI INDAH NATURAL,†vol. 5, no. 1, pp. 101–106,
R. Nita, J. M. Is, M. I. Fahlevi, F. Kesehatan, M. Universitas, and T. Umar,
“JURMAKEMAS (Jurnal Mahasiswa Kesehatan Masyarakat) Volume 2 Nomor
,Februari 2022 | 148,†vol. 2, 2022.
M. B. Anthony, “Analisa Risiko Keselamatan Dan Kesehatan Kerja Menggunakan
Standar AS/NZS 4360:2004 Di Perusahaan Pulp&Paper,†JATI UNIK J. Ilm. Tek. dan
Manaj. Ind., vol. 2, no. 1, p. 19, 2019, doi: 10.30737/jatiunik.v2i2.332.
Fina Fitria Oktari, “Analisis Manajemen Resiko K3 Pada Peti Kemas Dengan Metode
HIRADC di PT. PELABUHAN INDONESIA II,†Lap. Magang, vol. 49, no.
, 2021.
S. Winarto, H. M. Denny, and B. Kurniawan, “Studi Kasus Kecelakaan Kerja pada Pekerja Pengeboran Migas Seismic Survey PT. X di Papua Barat,†J. Promosi
Kesehat. Indones., vol. 11, no. 1, p. 51, 2016, doi: 10.14710/jpki.11.1.51-65.
L. Marlina and R. Rizal, “Penerapan Smk3 Di Lingkungan Kerja Manufaktur Produk
Makanan Dan Minuman,†Bina Tek., vol. 12, no. 1, p. 1, 2017, doi:
54378/bt.v12i1.84.
Eko Prasetyo, “IMPLEMENTASI PROGRAM INSPEKSI KESELAMATAN DAN
KESEHATAN KERJA ( K3 ) SEBAGAI UPAYA PENCEGAHAN KECELAKAAN
KERJA DI PT . PURA BARUTAMA KUDUS Eko Prasetyo Sekolah Tinggi Ilmu
Kesehatan Cendekia Utama Kudus Jalan Lingkar Raya Kudus – Pati Km . 5 Jepang ,
Mejo,†vol. 9, no. 1, pp. 81–87, 2022.
S. F. Haya and K. Tambunan, “Jurnal Ilmu Komputer, Ekonomi dan Manajemen
(JIKEM),†J. Ilmu Komputer, Ekon. dan Manaj., vol. 1, no. 1, pp. 129–138, 2022.
M. H. Firmansyah, “Penerapan Manajemen Risiko Keselamatan Dan Kesehatan Kerja
Di Rumah Sakit Islam Surabaya a. Yani,†J. Kesehat. Masy., vol. 10, no. 1, pp. 12–19,
, doi: 10.14710/jkm.v10i1.31550.
N. A. Dwijayanti, “Kinerja Program Kesehatan Dan Keselamatan Kerja (K3) Di
Perusahaan Plywood Tahun 2012 - 2016,†Indones. J. Occup. Saf. Heal., vol. 7, no. 1,
p. 102, 2018, doi: 10.20473/ijosh.v7i1.2018.102-111.
M. A. Kusuharto, S. M. Nasri, F. Kesehatan, M. U. Indonesia, J. Factor, and K. Kerja,
“KEPARAHAN KECELAKAAN KERJA SEKTOR PERKEBUNAN,†pp. 154–166,
H. Oktarina, “Pengaruh Pelaksanaan Program Magang,†vol. 5, no. 1, pp. 41–49, 2021.
M. F. Kurnianto and F. N. Azizah, “USULAN PERBAIKAN RISIKO
KECELAKAAN KERJA DENGAN METODE FAILURE MODE AND EFFECT
ANALYSIS ( FMEA ) DAN FISHBONE DIAGRAM,†vol. 6, pp. 18–23, 2022.
R. A. Fitri and V. Efelina, “Analisis Frequency Rate dan Severity Rate dalam
Kecelakaan Kerja di PT XYZ,†Go-Integratif J. Tek. Sist. dan Ind., vol. 2, no. 2, pp.
–111, 2021, doi: 10.35261/gijtsi.v2i2.5644.
K. Na, K. Waruwu, E. Elyani, and J. Nurdin, “Pengaruh keselamatan dalam bekerja
terhadap produktivitas pekerja pada pt musim mas,†vol. 7, no. 2, pp. 92–97, 2022.
I. Masrofah and M. Michael, “Analisis Pengaruh Kecelakaan Kerja terhadap
Produktivitas Kerja di CV. Karya Nugraha,†J. Media Tek. dan Sist. Ind., vol. 4, no.
, p. 85, 2020, doi: 10.35194/jmtsi.v4i2.1073.
A. Naranda, “Pеngaruh Kеsеlamatan dan Kеsеhatan Kеrja Tеrhadap Kinеrja
Karyawan Dеngan Variabеl Mеdiator Motivasi Kеrja Karyawan (Studi pada
Karyawan pabrikasi PG Kеbon Agung Malang ),†J. Adm. bisnis, vol. 50, no. 1, 2017.
Anwar, Syukriah, and Ayu, “Analisis Kesehatan Dan Keselamatan Kerja Berdasarkan
Metode Fault Tree Analysis Pada Area Packing Semen Di Pt. Lafarge Cement Lhokseumawe - Indonesia,†J. Sist. Tek. Ind., vol. 21, no. 1, pp. 24–31, 2019, doi:
32734/jsti.v21i1.899.
T. Harini, “Analisis Perbaikan Prosedur Kerja Menggunakan Metode Nordic Body
Map , Niosh Lifting Equation dan Job Safety Analysis di Pt Sahabat Mewah dan
Makmur,†vol. 3, no. 1, pp. 1–7, 2022.
P. Ginting, “Analisis Program Keselamatan & Kesehatan Kerja Di Bagian Produksi
Dengan 5S Dalam Konsep Kaizen Sebagai Upaya Pencegahan Kecelakaan Kerja Di
PT. Apindowaja Ampuh Persada,†Skripsi, vol. 20, pp. 1–20, 2013
Downloads
Published
How to Cite
Issue
Section
License
Information regarding Copyright and Licensing at JATI UNIK as follows:
- Licensed Use of Non - Commercial Articles will be governed by the Creative Commons Attribution license, which is featured on the Creative Commons Attribution Non-Commercial Share A Like 4.0 International License.
- The author guarantees that the articles published through JATI UNIK are original and do not contain statements that violate the law do not violate others' rights are subject to copyright, which is held exclusively by the author and free from the rights of third parties. The author is allowed to quote from various sources used for research and not to harm any party.
- JATI UNIK disseminates articles published with the rules set by Creative Commons. UNIK JATI license allows users to copy, distribute, display, and work for non-commercial purposes. Users also need to connect authors and JATI UNIK with the distribution of articles in journals.
- The Author rights, namely copyrights, ownership rights, patents, rights to use the substance of articles in the future, rights to reproduce articles for personal purposes and not to be traded, rights to conduct personal archives, rights to contract used for the non-exclusive distribution of articles published in the form a book and acknowledge the initial publication of the article originating from JATI UNIK.
- Suppose articles published by the author through JATI UNIK are compiled with other authors. In that case, it is necessary to create a form containing the authority of all authors involved in the article's production by including the agreement agreed upon by all authors in the article.
- The next point is, the agreement can be terminated if the author or JATI UNIK violates the agreement and cannot make repairs to the customer within a maximum of 2 months after being given information asking for the violation to be corrected. If there is no violation of the agreement, the license will automatically terminate and affect UNIQUE JATI UNIK.
- Regarding royalties, so far, if it is following applicable legal regulations, the author will waive his right to collect royalties on articles that have been licensed by JATI UNIK.
- In publishing the article, the editorial process is successful. JATI UNIK will continue it. JATI UNIK has the right to adjust articles related to punctuation, spelling, capital letters, references used, and usage adapted to JATI UNIK. The author acknowledges that the article can be published and accessed free of charge by the public.