PENELITIAN KUAT UJI TEKAN BETON DENGAN MEMANFAATKAN LIMBAH BETON YANG TIDAK TERPAKAI

Authors

  • Herlan Pratikto Kadiri University
  • Rekso Ajiono Kadiri University

DOI:

https://doi.org/10.30737/u%20karst.v1i2.411

Keywords:

Unused Concrete, Compresive Strength

Abstract

Concrete has many classifications and characteristics, from low-quality, medium to high-quality concrete. Along with the development of technology today many types of materials and mixtures are used. Additional materials include concrete that is not used. Tests of test objects in this study used a mixture of 10%, 15%, 20% and 25%. The variation is carried out at the age of 7, 21, and 28 days with the parameters used are only compressive strength. The results showed that the average compressive strength of concrete in each variation was 10% (22,155Mpa), 15% (17,514 Mpa), 20% (15,271 Mpa) and 25% (12,714 Mpa). With the target of K300 compressive strength, the result is mixed substitution with a maximum compressive strength percentage of 10% (22,155Mpa).

 

References

Departemen Pekerjaan Umum, 2011, Cara Uji Kuat Tekan Beton dengan

Departemen Pekerjaan Umum, 2002, Tata Cara Perhitungan Struktur BetonUntuk Bangunan Gedung dengan Standar SK SNI 03-2487-2002, BadanStandarisasi Nasional.

Departemen Pekerjaan Umum, 2008, Cara Uji Berat Isi Beton Ringan Struktural SNI 3402-2008, Badan Standarisasi Nasional

Departemen Pekerjaan Umum, 2013, Tata Cara Perhitungan Struktur BetonUntuk Bangunan Gedung dengan Standar SK SNI 03-2487-2013, BadanStandarisasi Nasional

JIS A 1148, 2010, Method of Test for Resistance of Concrete to Freeze andThawing, Japan Concrete Institute.

“Makalah tentang Semen Portlandâ€. 16 Mei 2018. http://ariefrvi. blogspot.co.id/2013/07/ makalah-tentang-semen-portland.html.

Mulyono, T. 2004,Teknologo Beton,Andi,Yogyakarta

Mustaqim, M. I., Marliansyah, J., Rahmi, A., Sipil, M. T., Teknik, F., Pengaraian, Pradana, S. A. (2013). Tugas akhir, (Pembimbing I), 2506.

SNI 15-2049-2004.Jakarta: “Semen Portland.†Departemen Pekerjaan Umum. Badan Standardisasi Nasional. (2004).

SNI 1974:2011, Cara uji kuat tekan beton dengan benda uji silinder.

SNI 2493:2011, Tata cara pembuatan dan perawatan benda uji di laboraturium.

SNI-2847-2013. Persyaratan beton Sstruktural untuk bangunan gedung.

SNI 1972. (2008). Cara Uji Slump Beton. Badan Standar Nasional Indonesia. “Cara menghitung Standar Deviasiâ€. 20 April 2018. https://proyeksipil.blogspot. co.id/2013/05/cara-menghitung-standard- deviasi dan.html.

SNI 03-0691-1996.(1996). Persyaratan Mutu Paving Plock. Badan Standar Nasional.

Downloads

PlumX Metrics

Published

2017-09-17

How to Cite

Pratikto, H., & Ajiono, R. (2017). PENELITIAN KUAT UJI TEKAN BETON DENGAN MEMANFAATKAN LIMBAH BETON YANG TIDAK TERPAKAI. UKaRsT, 1(2), 102–109. https://doi.org/10.30737/u karst.v1i2.411

Issue

Section

Articles