Pengukuruan Produktivitas Dengan Menggunakan Metode Objective Matrix di PT.ABC

Authors

  • Muhamad Bob Anthony Program Studi Teknik Industri, Fakultas Teknik, Universitas Serang Raya

DOI:

https://doi.org/10.30737/jatiunik.v3i1.494

Keywords:

Objective Matrix, Tank Cleaning, Productivity Measurement

Abstract

PT. ABC is a chemical company that produces emulsions. Evaluation of performance development in the production department requires a measurement of productivity with the aim of knowing the level of productivity in the production section that has been achieved based on the criteria that are indicators of productivity in the form of ratios, identifying the causes of the decline in productivity and making improvement plans in an effort to continuously increase productivity. The method used in measuring productivity in this study is the Objective Matrix method so the steps in this study refer to the need for matrix formation. Based on the measurement of the productivity value in the production section before making improvements with the Objective Matrix method for the 6 months period July 2017 to December 2017 the lowest productivity value was obtained in December 2017. The factor that caused this lowest productivity value was the very long reactor washing for 24 hours. Washing the reactor is very long because the washing method is still done manually. The productivity value increased after there was an improvement by shortening the reactor cleaning time by using the 300 bar pressurized water jet cleaner method, namely in January 2019 to 738 or 560.76% compared to the previous period and an increase of 146.0% compared to the standard productivity value.

 

PT.ABC merupakan salah satu perusahaan kimia yang memproduksi emulsi. Evaluasi perkembangan kinerja di bagian produksi memerlukan suatu pengukuran produktivitas dengan tujuan mengetahui tingkat produktivitas di bagian produksi yang telah dicapai berdasarkan kriteria-kriteria yang menjadi indikator produktivitas dalam bentuk rasio, mengidentifikasi penyebab terjadinya penurunan produktivitas dan melakukan perencanaan perbaikan sebagai upaya peningkatan produktivitas secara berkesinambungan. Metode yang digunakan dalam pengukuran produktivitas dalam penelitian ini adalah metode Objective Matrix sehingga langkah-langkah pada penelitian ini mengacu pada kebutuhan pembentukan matrik. Berdasarkan pengukuran nilai produktivitas di bagian produksi sebelum dilakukan perbaikan dengan metode Objective Matrix selama 6 bulan periode Juli 2017 sampai Desember 2017 diperoleh nilai produktivitas terendah di bulan Desember 2017. Faktor yang menyebabkan nilai produktivitas terendah ini adalah pencucian reaktor yang sangat lama yaitu selama 24 jam. Pencucian reaktor ini sangat lama dikarenakan metode pencucian  masih dilakukan secara manual. Nilai produktivitas mengalami peningkatan setelah ada perbaikan dengan mempersingkat waktu pencucian reaktor dengan menggunakan metode water jet cleaner bertekanan 300 bar yaitu pada Januari 2019 menjadi 738 atau 560.76% dibandingkan periode sebelumnya dan mengalami peningkatan 146.0% dibandingkan nilai produktivitas standar.  

 

References

F. A. Pratama and H. Henny, “Analisis Produktivitas Objective Matrix (Omax) Ditinjau Dari Keselamatan Dan Kesehatan Kerja Dilantai Produksi Di Cv. Grand Manufacturing Indonesia,†Ina. J. Ind. Qual. Eng., vol. 6, no. 2, pp. 1–8, 2018, doi: 10.34010/iqe.v6i2.987.

G. Jauhari, M. Fitri, and A. S. D. Nova, “PENERAPAN METODE OBJECTIVE MATRIX (OMAX) UNTUK MENGANALISIS PRODUKTIVITAS DI PT. NUSANTARA BETA FARMA PADANG,†J. Chem. Inf. Model., vol. 53, no. 9, pp. 1689–1699, 2019, doi: 10.1017/CBO9781107415324.004.

M. P. Nurwantara, “Productivity Analysis Of Coffee Production Process With Objective Matrix (Omax) Method (The Case Study at PT. Perkebunan Kandangan, Pulosari Panggungsari, Madiun),†SEAS (Sustainable Environ. Agric. Sci., vol. 2, no. 1, p. 18, 2018, doi: 10.22225/seas.2.1.538.18-26.

N. H. Hamidah, P. Deoranto, and R. Astuti, “ANALISIS PRODUKTIVITAS MENGGUNAKAN METODE OBJECTIVE MATRIX (OMAX): STUDI KASUS PADA BAGIAN PRODUKSI SARI ROTI PT NIPPON INDOSARI CORPINDO, TBK PASURUAN Productivity Analysis Using Objective Matrix (OMAX) Method: Case Study On The Production Departement Of,†J. Teknol. Pertan. Anal. Produkt., vol. 14, no. 3, pp. 215–222, 2013.

L. Susanti, H. raimona Zardy, and B. Yuliandrea, “Pengantar Ergonomi Industri,†Andalas Univ. Press, no. May, 2015.

V. Gaspersz, Continuous Cost Reduction Through Lean-Sigma Approach – Strategi Dramatik Reduksi Biaya dan Pemborosan Menggunakan Pendekatan Lean-Sigma. Jakarta: PT Gramedia Pustaka Utama, 2006.

F. Fihtri, “Analisa Produktifitas Menggunakan Metode Objective Matrix (OMAX),†J. Optimasi Sist. Ind., vol. 13, No. 1, pp. 548–555, 2014.

T. Afifi and Satriawan, “Analisis Produktivitas Produksi Di Perusahaan Kecap Manalagi Denpasar,†J. REKAYASA DAN Manag. AGROINDUSTRI, vol. 03, No. 3, pp. 133–142, 2015.

S. Phiong, “Pengukuran Kinerja Sumber Daya Manusia Dengan Pendekatan Human Resources Scorecard Dan Alat Ukur OMAX (OBJECTIVE MATRIX) Pada Bagian Produksi PT. Fajarindo Faliman Zipper,†J. Tek. Ind., vol. 08, No. 1, pp. 71–87, 2018.

S. Pakpahan and Ehsy, “Peningkatan Produktivitas Pada PT. Hamson Indonesia,†J. Tek. dan Ilmu Komput., vol. Vol. 06, N, pp. 411–434, 2017.

K. Rahmatullah and Wahyuni, “Analisa Produktivitas Pada Divisi Produksi PT. NXZ Menggunakan Metode Objective Matrix,†J. Tek. Ind., vol. Vol. 5, No, pp. 99–104, 2017.

M. Kurniawan and Kholik, “Perancangan Integrated Enviromental Perfomance Measurement System Di Rumah Sakit,†J. Tek. Ind., vol. 18, No. 1, pp. 9–18, 2017.

Suparto, “APPLIED PRODUCTIVITY MEASUREMENT WITH OBJECTIVE MATRIX (OMAX) METHOD (Case Study: Service Department in PT. Astra International Tbk Auto 2000 - Kenjeran Branch),†J. Appl. Ind. Eng. PGRI Adi Buana, vol. 2, no. 2, pp. 26–30, 2019.

H. C. Wahyuni and S. Setiawan, “Implementasi Metode Objective Matrix (OMAX) Untuk Pengukuran Produktivitas Pada PT.ABC,†PROZIMA (Productivity, Optim. Manuf. Syst. Eng., vol. 1, no. 1, p. 17, 2017, doi: 10.21070/prozima.v1i1.702.

A. Mail, T. Alisyahbana, A. Saleh, R. Malik, and I. Ibrahim, “ANALISIS PRODUKTIVITAS DENGAN METODE OBJEKTIVE MATRIX (OMAX) PADA CV. BINTANG JAYA,†J. Ind. Eng. Manag., vol. 3, p. 48, 2018, doi: 10.33536/jiem.v3i2.234.

M. Bahrudin and H. C. Wahyuni, “Pengukuran Produktivitas Kerja Karyawan pada Bagian Produksi dengan Menggunakan Metode Objective Matrix (OMAX) Dan Root Cause Analyze (RCA),†PROZIMA (Productivity, Optim. Manuf. Syst. Eng., vol. 1, no. 2, p. 116, 2018, doi: 10.21070/prozima.v1i2.1299.

A. A. Mahmudi, B. Surarso, and A. Subagio, “Kombinasi Balanced Scorecard dan Objective Matrix Untuk Penilaian Kinerja Perguruan Tinggi,†J. Sist. Inf. Bisnis, vol. 4, no. 1, pp. 1–10, 2014, doi: 10.21456/vol4iss1pp01-10.

R. A. Sari, R. Yuniarti, and F. R. N. Safitri, “Evaluasi Kinerja Perusahaan Berdasarkan Perspektif Organisasi, Proses, dan Staf Berbasis AHP dan OMAX,†J. Tek. Ind., vol. 19, no. 1, pp. 49–57, 2018.

Okfalisa, S. Anugrah, W. Anggraini, M. Absor, S. S. M. Fauzi, and Saktioto, “Integrated analytical hierarchy process and objective matrix in balanced scorecard dashboard model for performance measurement,†Telkomnika (Telecommunication Comput. Electron. Control., vol. 16, no. 6, pp. 2703–2711, 2018, doi: 10.12928/TELKOMNIKA.v16i6.9648.

I. R. B. Yosan, I. M. Kholil, and W. Soraya, “Increasing Productivity With Objective Matrix Method Case Study on Building Maintenance Management Pio Pt . Xxx,†9th Int. Semin. Ind. Eng. Manag., 2018.

C. Mulwa, P. Marenya, D. B. Rahut, and M. Kassie, “Response to climate risks among smallholder farmers in Malawi: A multivariate probit assessment of the role of information, household demographics, and farm characteristics,†Clim. Risk Manag., vol. 16, pp. 208–221, 2017, doi: 10.1016/j.crm.2017.01.002.

M. M. Rojas-Downing, A. P. Nejadhashemi, T. Harrigan, and S. A. Woznicki, “Climate change and livestock: Impacts, adaptation, and mitigation,†Clim. Risk Manag., vol. 16, pp. 145–163, 2017, doi: 10.1016/j.crm.2017.02.001.

E. A. Faridz, “Pengukuran dan analisis produktivitas produksi dengan metode objective matrix (OMAX) di PG. Krebet baru malang,†Agrointek, vol. 5, no. 2, pp. 80–87, 2011.

M. A. Wibowo and M. N. Sholeh, “The analysis of supply chain performance measurement at construction project,†Procedia Eng., vol. 125, pp. 25–31, 2015, doi: 10.1016/j.proeng.2015.11.005.

F. Tania and M. Ulkhaq, “Pengukuran dan Analisis Produktivitas di PT. Tiga Manunggal Synthetic Industries dengan Menggunakan Metode Objective Matrix ( OMAX ),†Ind. Eng. Online J., vol. 5, no. 4, pp. 1–9, 2016.

A. N. Cahyawati, “Penerapan Internal Eksternal Matrix Dan Performance Prism Dalam Upaya Pengukuran Kinerja Rumah Sakit X Malang,†J. Ind. Eng. Manag., vol. 2, no. 1, p. 1, 2017, doi: 10.33536/jiem.v2i1.100.

A. Mail, T. Alisyahbana, A. Saleh, R. Malik, and I. Ibrahim, “Analisis Produktivitas Dengan Metode Objektive Matrix (Omax) Pada Cv. Bintang Jaya,†J. Ind. Eng. Manag., vol. 3, no. 2, p. 48, 2018, doi: 10.33536/jiem.v3i2.234.

M. B. Anthony, P. Studi, T. Industri, F. Teknik, U. S. Raya, and P. Tangki, “Pengukuruan Produktivitas Dengan Menggunakan Metode Objective Matrix di PT . ABC,†vol. 3, no. 1, pp. 9–19, 2019.

I. Hamdala, W. Azlia, and S. Elman Swara, “Evaluasi Kinerja Rantai Pasok Sari Apel Untuk Meningkatkan Kinerja Perusahaan,†J. Ind. Eng. Manag., vol. 2, no. 2, p. 48, 2017, doi: 10.33536/jiem.v2i2.152.

Nasir, “FISHBONE STRATEGY IN TEACHING ENGLISH IN INDONESIA: A TOOL,†J. Chem. Inf. Model., vol. 53, no. 9, pp. 1689–1699, 2019, doi: 10.1017/CBO9781107415324.004.

R. O. Putri and B. M. Wibawa, “Identifikasi Permasalahan Komplain pada E-Commerce Menggunakan Metode Fishbone,†J. Sains dan Seni ITS, vol. 6, no. 1, 2017, doi: 10.12962/j23373520.v6i1.21485.

R. Hutagaol, “Analysis of the Implementation of Nursing Professional Values in Referral Hospitals Jakarta: Fishbone Analysis,†Int. J. Nurs. Heal. Serv., vol. 2, no. 1, pp. 108–116, 2019, doi: 10.35654/ijnhs.v2i1.73.

Downloads

PlumX Metrics

Published

2019-10-30

How to Cite

Anthony, M. B. (2019). Pengukuruan Produktivitas Dengan Menggunakan Metode Objective Matrix di PT.ABC. JATI UNIK : Jurnal Ilmiah Teknik Dan Manajemen Industri, 3(1), 13–30. https://doi.org/10.30737/jatiunik.v3i1.494

Issue

Vol. 3 No. 1 (2019): October

Section

Articles

License

Information regarding Copyright and Licensing at JATI UNIK as follows:

  1. Licensed Use of Non - Commercial Articles will be governed by the Creative Commons Attribution license, which is featured on the Creative Commons Attribution Non-Commercial Share A Like 4.0 International License.
  2. The author guarantees that the articles published through JATI UNIK are original and do not contain statements that violate the law do not violate others' rights are subject to copyright, which is held exclusively by the author and free from the rights of third parties. The author is allowed to quote from various sources used for research and not to harm any party.
  3. JATI UNIK disseminates articles published with the rules set by Creative Commons. UNIK JATI license allows users to copy, distribute, display, and work for non-commercial purposes. Users also need to connect authors and JATI UNIK with the distribution of articles in journals.
  4. The Author rights, namely copyrights, ownership rights, patents, rights to use the substance of articles in the future, rights to reproduce articles for personal purposes and not to be traded, rights to conduct personal archives, rights to contract used for the non-exclusive distribution of articles published in the form a book and acknowledge the initial publication of the article originating from JATI UNIK.
  5. Suppose articles published by the author through JATI UNIK are compiled with other authors. In that case, it is necessary to create a form containing the authority of all authors involved in the article's production by including the agreement agreed upon by all authors in the article.
  6. The next point is, the agreement can be terminated if the author or JATI UNIK violates the agreement and cannot make repairs to the customer within a maximum of 2 months after being given information asking for the violation to be corrected. If there is no violation of the agreement, the license will automatically terminate and affect UNIQUE JATI UNIK.
  7. Regarding royalties, so far, if it is following applicable legal regulations, the author will waive his right to collect royalties on articles that have been licensed by JATI UNIK.
  8. In publishing the article, the editorial process is successful. JATI UNIK will continue it. JATI UNIK has the right to adjust articles related to punctuation, spelling, capital letters, references used, and usage adapted to JATI UNIK. The author acknowledges that the article can be published and accessed free of charge by the public.