Mitigasi Risiko dalam Pengadaan Unit Set Simulator Pelatihan: Integrasi House of Risk dan Interpretive Structural Modeling di PT XYZ
DOI:
https://doi.org/10.30737/jatiunik.v10i1.8073Keywords:
House of Risk, Interpretive Structural Modeling, Procurement, SCOR, Supply Chain RiskAbstract
Procuring an engineer-to-order training simulator requires close coordination between software development and the procurement of specialized hardware. Although the House of Risk method ranks mitigation actions, it does not identify which actions are prerequisites for others. This study aimed to identify the main sources of risk and determine the order of mitigation actions for the procurement of one simulator at PT XYZ. The case study drew on assessments by three project experts and data from 14 monthly progress reports. The Supply Chain Operations Reference model was used to map procurement activities. The House of Risk method quantified aggregate risk potential and ranked actions by their effectiveness-to-difficulty ratios. Interpretive Structural Modeling then mapped dependencies among actions. Five of eleven risk agents accounted for 86.18% of total aggregate risk potential. Poor coordination between programmers and users contributed the largest share (34.39%). Of nine mitigation actions, staged model acceptance testing ranked first (6,561), followed by user acceptance testing (5,832). The hierarchy identified user acceptance testing as foundational. These findings guide project teams in agreeing on user acceptance criteria at project initiation and using those criteria to define design specifications, set milestones, and validate the model.References
[1] A. Dolgui, D. Ivanov, and M. Rozhkov, “Does the ripple effect influence the bullwhip effect? An integrated analysis of structural and operational dynamics in the supply chain,” Int. J. Prod. Res., vol. 58, no. 5, pp. 1285–1301, 2020, doi: 10.1080/00207543.2019.1627438.
[2] A. Wieland, “Dancing the supply chain: Toward transformative supply chain management,” J. Supply Chain Manag., vol. 57, no. 1, pp. 58–73, 2021, doi: 10.1111/jscm.12248.
[3] D. Ivanov, “Supply Chain Viability and the COVID-19 Pandemic: A Conceptual and Formal Generalisation of Four Major Adaptation Strategies,” Int. J. Prod. Res., vol. 59, no. 12, pp. 3535–3552, 2021, doi: 10.1080/00207543.2021.1890852.
[4] P. Madzík, L. Falát, L. Copuš, and K. Čarnogurský, “Resilience in supply chain risk management in disruptive world: rerouting research directions during and after pandemic,” Ann. Oper. Res., 2024, doi: 10.1007/s10479-024-06126-x.
[5] V. G. Cannas and J. Gosling, “A decade of engineering-to-order (2010–2020): Progress and emerging themes,” Int. J. Prod. Econ., vol. 241, p. 108274, Nov. 2021, doi: 10.1016/J.IJPE.2021.108274.
[6] H. Shurrab, P. Jonsson, and M. I. Johansson, “A tactical demand-supply planning framework to manage complexity in engineer-to-order environments: insights from an in-depth case study,” Prod. Plan. Control, vol. 33, no. 5, pp. 462–479, 2022, doi: 10.1080/09537287.2020.1829147.
[7] I. N. Pujawan and L. H. Geraldine, “House of risk: a model for proactive supply chain risk management,” Bus. Process Manag. J., vol. 15, no. 6, pp. 953–967, 2009, doi: 10.1108/14637150911003801.
[8] T. L. T. Nguyen, T. T. Tran, T. P. Huynh, T. K. D. Ho, A. T. Le, and T. K. H. Do, “Managing risks in the fisheries supply chain using House of Risk Framework (HOR) and Interpretive Structural Modeling (ISM),” in IOP Conference Series: Materials Science and Engineering, Institute of Physics Publishing, Apr. 2018. doi: 10.1088/1757-899X/337/1/012030.
[9] C. Natalia, Y. F. T. Br. Hutapea, C. W. Oktavia, and T. P. Hidayat, “Interpretive Structural Modeling and House of Risk Implementation for Risk Association Analysis and Determination of Risk Mitigation Strategy,” Jurnal Ilmiah Teknik Industri, vol. 19, no. 1, pp. 10–21, Jun. 2020, doi: 10.23917/jiti.v19i1.9014.
[10] R. Oktavera, M. R. Kurniawan, R. Saraswati, and B. Sutejo, “Risk Management Analysis in Tobacco Supply Chain Using the House of Risk Method,” Journal of Applied Science, Engineering, Technology, and Education, vol. 4, no. 2, pp. 167–175, Dec. 2022, doi: 10.35877/454RI.asci844.
[11] M. M. Haqi, F. Pulansari, and S. Dewi, “The Implementation Of House Of Risk And Interpretive Structural Modeling Approach To Risk Mitigation Of Supply Chain Problems In The Fertilizer Industry,” Pamator J., vol. 17, no. 2, pp. 256–271, 2024, doi: 10.21107/pamator.v17i2/25875.
[12] N. A. Savitri, R. Kusumawardani, and N. Ramadani, “Supply Chain Risk Management in The Fertilizer Company Using Interpretive Structural Modelling (ISM) And House Of Risk (HOR),” JISO: J. Ind. Syst. Optim., vol. 8, no. 1, pp. 104–111, Jun. 2025.
[13] A. F. L. Pettawali, Z. Zainuddin, J. C. Saputra, D. Nasihardani, and H. Pujianto, “Analisis Risiko Rantai Pasok Menggunakan Metode House Of Risk (HOR) pada CV. Padaidi,” Jurnal Rekayasa Sistem Industri, vol. 14, no. 2, pp. 229–242, Oct. 2025, doi: 10.26593/jrsi.v14i2.9156.229-242.
[14] S. Az-zahro and A. Kalista, “Strategi Mitigasi Risiko Supply Chain pada Industri Pakaian melalui Analisis SWOT dan House of Risk,” JATI UNIK: J. Ilm. Tek. dan Manaj. Ind., vol. 8, no. 2, pp. 108–122, Apr. 2025, doi: 10.30737/jatiunik.v8i2.6226.
[15] M. R. Akbar and A. E. Apsari, “Mitigasi Risiko Rantai Pasok Berbasis House of Risk di PT. Mandiri Jogja Internasional,” JURMATIS: J. Manaj. Teknol. dan Tek. Ind., vol. 6, no. 2, pp. 95–110, Aug. 2024, doi: 10.30737/jurmatis.v6i2.5681.
[16] H.-C. Pfohl, P. Gallus, and D. Thomas, “Interpretive structural modeling of supply chain risks,” Int. J. Phys. Distrib. Logist. Manag., vol. 41, no. 9, pp. 839–859, 2011, doi: 10.1108/09600031111175816.
[17] A. Sreenivasan, S. Ma, P. Nedungadi, V. R. Sreedharan, and R. R. Raman, “Interpretive Structural Modeling: Research Trends, Linkages to Sustainable Development Goals, and Impact of COVID-19,” Sustainability, vol. 15, no. 5, Mar. 2023, doi: 10.3390/su15054195.
[18] S. Sorooshian, M. Tavana, and S. Ribeiro-Navarrete, “From classical interpretive structural modeling to total interpretive structural modeling and beyond: A half-century of business research,” J. Bus. Res., vol. 157, Art. no. 113642, Mar. 2023, doi: 10.1016/j.jbusres.2022.113642.
[19] Z. C. Uk, C. Basfirinci, and A. Mitra, “Weighted Interpretive Structural Modeling for Supply Chain Risk Management: An Application to Logistics Service Providers in Turkey,” Logistics, vol. 6, no. 3, Sep. 2022, doi: 10.3390/logistics6030057.
[20] J. El Baz and S. Ruel, “Can supply chain risk management practices mitigate the disruption impacts on supply chains’ resilience and robustness? Evidence from an empirical survey in a COVID-19 outbreak era,” Int. J. Prod. Econ., vol. 233, Mar. 2021, doi: 10.1016/j.ijpe.2020.107972.
[21] X. Brusset, D. Ivanov, A. Jebali, D. La Torre, and M. Repetto, “A dynamic approach to supply chain reconfiguration and ripple effect analysis in an epidemic,” Int. J. Prod. Econ., vol. 263, Sep. 2023, doi: 10.1016/j.ijpe.2023.108935.
[22] H. Lorentz, S. Laari, J. Meehan, M. Eßig, and M. Henke, “An attention-based view of supply disruption risk management: balancing biased attentional processing for improved resilience in the COVID-19 context,” Int. J. Oper. Prod. Manag., vol. 41, no. 13, pp. 152–177, 2021, doi: 10.1108/IJOPM-06-2021-0381.
[23] M. S. Narassima, S. P. Anbuudayasankara, K. Mathiyazhagan, K. Ganesh, and T.-R. Lee, “Supply chain resilience: conceptual model building and validation,” Int. J. Logist. Res. Appl., vol. 27, no. 5, pp. 781–813, 2024.
[24] A. S. Albana, R. D. Prihadianto, and H. Mardhiana, “Framework Development for The Assessment of The Supply Chain Resilience Using The House of Risk,” Indonesian Journal of Business and Entrepreneurship, vol. 8, no. 2, p. 304, May 2022, doi: 10.17358/ijbe.8.2.304.
[25] C. R. dos Santos, U. R. de Oliveira, and V. Aprigliano, “Supplier Risk in Supply Chain Risk Management: An Updated Conceptual Framework,” Appl. Sci., vol. 15, no. 13, Jul. 2025, doi: 10.3390/app15137128.
[26] M. J. Hermoso-Orzáez and J. Garzón-Moreno, “Risk management methodology in the supply chain: a case study applied,” Ann. Oper. Res., vol. 313, no. 2, pp. 1051–1075, Jun. 2022, doi: 10.1007/s10479-021-04220-y.
[27] S. Akhmad, D. M. Utama, Q. Uyun, and D. S. Wijaya, “A new hybrid integrated framework for mitigating risks in sustainable supply chains: A case study on Indonesia’s carrageenan industry,” Clean. Logist. Supply Chain, vol. 19, Jun. 2026, doi: 10.1016/j.clscn.2026.100307.
[28] A. Harju, J. Hallikas, M. Immonen, and K. Lintukangas, “The impact of procurement digitalization on supply chain resilience: empirical evidence from Finland,” Supply Chain Manag., vol. 28, no. 7, pp. 62–76, 2023, doi: 10.1108/SCM-08-2022-0312.
[29] M. Halicki, “Project supply chain management and risk - analysis and IT support,” in Procedia Comput. Sci., Elsevier B.V., 2024, pp. 4058–4065. doi: 10.1016/j.procs.2024.09.244.
[30] M. Liu, T. Lin, F. Chu, Y. Ding, F. Zheng, and C. Chu, “Bi-objective optimization for supply chain ripple effect management under disruption risks with supplier actions,” Int. J. Prod. Econ., vol. 265, p. 108997, Nov. 2023, doi: 10.1016/J.IJPE.2023.108997.
[31] A. M. Khedr and S. R. S, “Enhancing supply chain management with deep learning and machine learning techniques: A review,” J. Open Innov. Technol. Mark. Complex., vol. 10, no. 4, p. 100379, Dec. 2024, doi: 10.1016/j.joitmc.2024.100379.
[32] M. A. Jahin, S. A. Naife, A. K. Saha, and M. F. Mridha, “AI in Supply Chain Risk Assessment: A Systematic Literature Review and Bibliometric Analysis,” Feb. 2025, [Online]. Available: http://arxiv.org/abs/2401.10895
[33] Y. Wang, A. Chen, and N. Liu, “Constructing resilient supply chain for risk-averse buyers by data-driven robust optimization approach,” Int. J. Prod. Econ., vol. 289, Nov. 2025, doi: 10.1016/j.ijpe.2025.109734.
[34] APICS, “APICS Supply Chain Operations Reference Model SCOR Version 12.0,” 2017.
[35] J. M. Juran, Managerial Breakthrough: The Classic Book on Improving Management Performance (Revised Edition). New York: McGraw-Hill, 1995.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Ayuningtyas Woro Hapsari, Galih Prihasetya Hermawan

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Information regarding Copyright and Licensing at JATI UNIK as follows:
- Licensed Use of Non - Commercial Articles will be governed by the Creative Commons Attribution license, which is featured on the Creative Commons Attribution Non-Commercial Share A Like 4.0 International License.
- The author guarantees that the articles published through JATI UNIK are original and do not contain statements that violate the law do not violate others' rights are subject to copyright, which is held exclusively by the author and free from the rights of third parties. The author is allowed to quote from various sources used for research and not to harm any party.
- JATI UNIK disseminates articles published with the rules set by Creative Commons. UNIK JATI license allows users to copy, distribute, display, and work for non-commercial purposes. Users also need to connect authors and JATI UNIK with the distribution of articles in journals.
- The Author rights, namely copyrights, ownership rights, patents, rights to use the substance of articles in the future, rights to reproduce articles for personal purposes and not to be traded, rights to conduct personal archives, rights to contract used for the non-exclusive distribution of articles published in the form a book and acknowledge the initial publication of the article originating from JATI UNIK.
- Suppose articles published by the author through JATI UNIK are compiled with other authors. In that case, it is necessary to create a form containing the authority of all authors involved in the article's production by including the agreement agreed upon by all authors in the article.
- The next point is, the agreement can be terminated if the author or JATI UNIK violates the agreement and cannot make repairs to the customer within a maximum of 2 months after being given information asking for the violation to be corrected. If there is no violation of the agreement, the license will automatically terminate and affect UNIQUE JATI UNIK.
- Regarding royalties, so far, if it is following applicable legal regulations, the author will waive his right to collect royalties on articles that have been licensed by JATI UNIK.
- In publishing the article, the editorial process is successful. JATI UNIK will continue it. JATI UNIK has the right to adjust articles related to punctuation, spelling, capital letters, references used, and usage adapted to JATI UNIK. The author acknowledges that the article can be published and accessed free of charge by the public.









