Pengelolaan Sumber Daya pada UMKM ADK Terbang Menggunakan Metode American Productivity Center untuk Meningkatkan Produktivitas dan Profitabilitas

Authors

  • Lukman Hakim Program Studi Teknik Industri, Fakultas Teknik, Universitas Yudharta Pasuruan
  • M. Imron Mas'ud Program Studi Teknik Industri, Fakultas Teknik, Universitas Yudharta Pasuruan

DOI:

https://doi.org/10.30737/jatiunik.v8i1.5750

Keywords:

APC, Resource management , UMKM productiviy, UMKM profitabilty

Abstract

Productivity is the key for business actors to compete in a highly competitive market. Productivity is closely related to the effectiveness and efficiency of using resources in producing output. This research focuses on Flying ADK MSMEs, which shows a significant increase in production in three periods (May 2023 – March 2024). Production achievement that continues to approach the set targets shows great potential for growth, but requires further strategic interventions to improve efficiency and competitiveness. The purpose of the study is to analyze the level of productivity, profitability, and price improvement factors in ADK Fly MSMEs and provide recommendations for improvement. The method used is  the American Productivity Center (APC), to measure productivity, profitability, and price improvement factors through optimizing the use of resources such as labor, raw materials, energy, and capital. The measurement results showed an increase in productivity of 1.4% in the second period and 0.4% in the third period. Profitability also increased by 1.4% and 0.4% in the same period. The price improvement index increased every year, reaching 0.97% in the second period and 0.93% in the third period, which had a positive impact on the company's productivity and profitability. This increase was analyzed in detail using a fishbone diagram. The results of this study provide recommendations that can be used by business actors to optimize resources and improve operational efficiency.

References

R. P. Dewanti, E. Paryanto, J. A. Pradana, and C. Harsito, “Financial Feasibility of Modification Workshop Case Studies: Be-Modified,” Int. J. Sustain. Dev. Plan., vol. 17, no. 6, pp. 1865–1871, 2022, doi: 10.18280/ijsdp.170621.

J. A. Pradana, A. Komari, and L. D. Indrasari, “STUDI KELAYAKAN BISNIS TELL KOPI DENGAN ANALISIS FINANSIAL,” Ind. Inov. J. Tek. Ind., vol. 10, no. 2, pp. 92–97, 2020.

J. Z. Haslindah1*, Basri Modding2, Roslina Alam3, “PENGARUH KOMPETENSI, MOTIVASI, LINGKUNGAN KERJA TERHADAP KEPUASAN PEKERJA DAN KINERJA PEKERJA PROSES PANEN PADI KELOMPOK TANI KABUPATEN PINRANG,” J. Teknol., vol. 17, no. April, 2022.

I. Gusmiarti, “Negara dengan Jam Kerja Terlama di Dunia,” Goodstats.id.

R. Yudhaningsih, “Peningkatan Efektivitas Kerja Melalui Komitmen , Perubahan dan Budaya Organisasi,” pp. 40–50.

E. Sadler-smith, E. Sadler-smith, and E. Sadler-, “Organization Studies,” 2004, doi: 10.1177/0170840604036914.

I. W. M. Yasa, “Pengaruh Konflik Peran dan Ambiguitas Peran Terhadap Kinerja Pegawai Melalui Mediasi Stress Kerja Pada Dinas Kesehatan Kota Denpasar Bali,” JAGADHITAJurnal Ekon. Bisnis, vol. 4, no. 1, 2017.

Statistik, "Catalog 1101001,"statistik, pp. 1-804

B. Parmadi, a. a. ngura. anom KumBara, a. a. B. WiraWan, and i gede arya Sugiartha, “Globaliasi dan Hegemoni Terhadap Transformasi Musik Dol di Bengkulu,” MUDRA, vol. 33, pp. 67–75, 2018.

H. Suliantoro, A. Arvianto, and P. S. Kusumo, “ANALISA DAN EVALUASI PRODUKTIVITAS MELALUI PENDEKATAN THE AMERICAN PRODUCTIVITY CENTER MODEL (APC) (Studi Kasus di PT. Gratia Husada Farma),” J@Ti Undip, vol. 2, no. 1, p. 67, 2012.

T. Fei et al., “PENGARUH KEPUASAN KERJA TERHADAP KINERJA KARYAWAN MELALUI MOTIVASI KERJA PADA CV . UNION EVENT PLANNER,” J. AGORA, vol. 6, no. 1, 2018.

R. Febrianti, M. Amanda, P. S. Manajemen, U. Mohammad, and H. Thamrin, “Pengaruh Penempatan dan Kompensasi Terhadap Kinerja Karyawan Pada PT . Primavera International Jakarta,” vol. 1, no. 1, pp. 61–70, 2020.

I. G. . M. D. Agus Santoso, “PENGARUH EFIKASI DIRI, MOTIVASI KERJA, LINGKUNGAN KERJA TERHADAP KEPUASAN KERJA KARYAWAN PT. SUKANDA DJAYA DENPASAR Agus,” vol. 8, no. 11, pp. 6488–6508, 2019.

Y. D. Polewangi, H. Andrian, M. Banjarnahor, S. Munte, and N. Siregar, “Penggunaan Metode American Productivity Center (APC) Untuk Pengukuran Produktivitas Pada UMKM XYZ,” J. Ind. Manuf. Eng., vol. 7, no. 1, pp. 1–11, 2023, doi: 10.31289/jime.v7i1.8252.

J. A. Pradana, K. Sukma, Yunastrian, and M. F. Abdullah, “Integrasi Waiting Line dan Fishbone Diagram Sebagai Optimasi Jumlah Fasilitas Antrean Migrasi Rekening Bank,” J. INTECH Tek. Ind. Univ. Serang Raya, vol. 08, no. 01, pp. 1–9, 2022.

R. Septiano, O. H. Putri, and F. V. Shadam, “Analysis of Productivity Measurement Using The American Productivity Center (APC) Method (Case Study PG Tjoekir Jombang, East Java),” Int. Conf. Econ. , Manag. , Bus. ( IC-EMBus ), vol. 1, pp. 444–454, 2023.

A. Ali, Syarifuddin, and T. H. S. Manik, “Pengukuran produktivitas menggunakan metode American Productivity Center (APC) di PT. Ima Montaz Sejahtera,” Ind. Eng. J., vol. 7, no. 2, pp. 11–17, 2018.

S. Pengajar, P. Studi, T. Industri, F. Teknik, J. Pusat, and D. K. Ibukota, “Aplikasi Model APC ( American Productivity Center ) Sebagai Penentu Fokus Perbaikan Produktivitas,” M e n a r a, vol. 12, no. 1, pp. 1–26, 2024.

I. Hanif, I. Maflahah, and M. Fahkry, “Analisis Produktivitas Roti Pia Pada Irt Pia Latief Kediri,” Agrointek, vol. 13, no. 2, pp. 143–154, 2019, doi: 10.21107/agrointek.v13i2.5291.

D. Walady Utama, Y. Fiqri Lubis, and Y. Meuthia Hasibuan, “Analisis Produktivitas dengan menggunakan Metode American Productivity Center (APC) Pada PT. Florindo Makmur,” J. Surya Tek., vol. 11, no. 1, pp. 206–210, 2024, doi: 10.37859/jst.v11i1.7008.

Ahmudi, M. Mahachandra, and N. U. Handayani, “Productivity Evaluation Through American Productivity Center Approach at PT Sejahtera Furnindo,” IOP Conf. Ser. Mater. Sci. Eng., vol. 598, no. 1, 2019, doi: 10.1088/1757-899X/598/1/012074.

D. A. Rachman, DAN R & D. 2024.

Fatimah, “PENGARUH MODAL KERJA DAN VOLUME PENJUALAN TERHADAP PROFITABILITAS PADA PERUSAHAAN MANUFAKTUR SUB SEKTOR MAKANAN DAN MINUMAN YANG TERDAFTAR DI BURSA EFEK INDONESIA TAHUN,” JAPB, vol. 3, 2018.

D. A. P. Pahlevi, “Analisis Produktivitas Usaha Dagang Menggunakan Metode APC dan Craig-Harris di Kecamatan Kepanjenkidul,” J. Ilmu Ekon. JIE, vol. 7, no. 01, pp. 53–64, 2023, doi: 10.22219/jie.v7i01.23921.

P. Lewis and A. Thornhill, “for Business Students”.

W. Yuliani, “METODE PENELITIAN DESKRIPTIF KUALITATIF DALAM PERSPEKTIF BIMBINGAN DAN KONSELING,” Quanta, vol. 2, no. 2, pp. 83–91, 2018, doi: 10.22460/q.v1i1p1-10.497.

D. Anggara, F. Sains, D. A. N. Teknologi, U. Islam, N. Sultan, and S. Kasim, “Diajukan Sebagai Salah Satu Syarat Untuk Memperoleh Gelar Sarjana Teknik pada Jurusan Teknik Industri,” 2019.

N. N. Firdaus and B. Santoso, “STOPLES PLASTIK DENGAN METODE AMERICAN PRODUCTIVITY CENTER ( APC ) DI PT . XYZ,” vol. 02, no. 02, pp. 60–71, 2021.

I. Kusumanto and S. H. Hermanto, “Analisis Produktivitas PT . Perkebunan Nusantara V ( PKS ) Sei Galuh Dengan Menggunakan Metode American Productivity Center ( APC ),” vol. 2, no. 2, pp. 128–137, 2016.

A. A. D. Meike Elsye Beatrix, “ANALISA PRODUKTIVITAS DENGAN MENGGUNAKAN MODEL PENGUKURAN THE AMERICAN PRODUCTIVITY CENTER ( APC ) PADA PRODUK ALUMUNIUM SHEET DAN ALUMUNIUM FOIL,” vol. XIII, no. 2, pp. 154–166, 2019.

R. R. Suryant0, “ANALISIS PRODUKTIVITAS PERUSAHAAN DENGAN METODE AMERICAN PRODUCTIVITY CENTER (APC) (Studi kasus: PT. CAHAYA BUMI INTANPARI, KARANGANYAR),” 2020.

J. V. & V. S. Rao1, “IMPLEMENTATION OF HYBRID ARTIFICIAL NEURAL NETWORK AND MULTI-CRITERIA DECISION MODEL FOR THE RANKING OF CRITERIA THAT AFFECT PRODUCTIVITY – A CASE STUDY. J. Vijayanand 1* & V. Sheshagiri Rao 1 ARTICLE INFO,” vol. 35, no. May, pp. 1–19, 2024.

F. F. Tendean et al., “METODE AMERICAN PRODUCTIVITY CENTER DI INDUSTRI KERAJINAN KAIN BATIK Jurnal Tekno Mesin / Volume 10 Nomor 1,” vol. 10, pp. 65–72, 2022.

Muhammad Firdaus, D. Yana, and M. Andriani, “Analysis Using the American Productivity Center (APC) Method Case Study UD. Tempe Mawar Indah,” JURUTERA - J. Umum Tek. Terap., vol. 10, no. 02, pp. 58–62, 2023, doi: 10.55377/jurutera.v10i02.7317.

Downloads

PlumX Metrics

Published

2024-10-25

How to Cite

Hakim, L., & Mas’ud, M. I. (2024). Pengelolaan Sumber Daya pada UMKM ADK Terbang Menggunakan Metode American Productivity Center untuk Meningkatkan Produktivitas dan Profitabilitas. JATI UNIK : Jurnal Ilmiah Teknik Dan Manajemen Industri, 8(1). https://doi.org/10.30737/jatiunik.v8i1.5750

Issue

Section

Articles