Analisis Potensi Bahaya dan Evaluasi Risiko Menggunakan Job Safety Analysis (JSA) untuk Meningkatkan Keselamatan Kerja di PT Titilas Sembada Primandiri
DOI:
https://doi.org/10.30737/jatiunik.v9i1.6923Keywords:
Job Safety Analysis, Hazard Identification, Risk Evaluation, Workplace Safety, Manufacturing IndustryAbstract
Work accidents are still common in the manufacturing sector despite various preventive measures that have been implemented. PT Titilas Sembada Primandiri, a company that manufactures electrical panels, faces high risks due to the complexity of the assembly process and the use of voltage equipment. This condition demands an in-depth analysis to identify hazards and assess the level of risk. This research aims to identify potential hazards, assess work risks, and provide control recommendations through the implementation of Job Safety Analysis (JSA) to improve occupational safety at PT Titilas Sembada Primandiri. A qualitative approach is used with direct observation in the work area and the application of JSA at each stage of electrical panel assembly to recognize hazards and determine control measures. The main hazards were found to be electric shock, physical injury, and equipment damage. The use of PPE, safety training, and strict implementation of SOPs are recommended to reduce the risk. JSA is effective in identifying and reducing the risk of work accidents in manufacturing environments. The research strengthens JSA as a proactive risk management tool in the industrial sector. Provide guidelines for companies in improving the culture of occupational safety.
References
[1] PAKKI, “K3 dan SDGs: Sinergi untuk Masa Depan yang Lebih Baik,” PAKKI.
[2] and C. W. A. Smith, B. Johnson, “Analysis of Hazard Potential and Risk Evaluation Using Job Safety Analysis (JSA) to Improve Workplace Safety at PT Titilas Sembada Primandiri,” JATI UNIK J. Ilm. Tek. dan Manaj. Ind. vol. x, no. x, pp. x–x, 2020., 2020.
[3] B. Santoso, “Cash Flow Dalam Ekonomi Teknik,” 2013.
[4] S. J. Smith, “Risk Evaluation and Safety Protocols in Manufacturing: A Review of Job Safety Analysis in Industrial Applications,” J. Ind. Eng. Manag, vol. 23, n, 2019.
[5] J. J. and T. Lee, “Evaluation of Safety Management Systems in the Electrical Manufacturing Sector,” J. Saf. Manag, vol. 28, 2020.
[6] M. H. Kusnadi, A., & Pratama, “Analysis of Workplace Safety in Electrical Panel Production,” J. Manuf. Process, vol. 15, n, 2018.
[7] Tarigan, “Feasibility Study Analysis of Establishing Archery Sports Special Place,” J. Phys. Conf. Ser, vol. 1007, 2018.
[8] F. Ghasemi, A. Doosti-Irani, and H. Aghaei, “Applications, Shortcomings, and New Advances of Job Safety Analysis (JSA): Findings from a Systematic Review,” Saf. Health Work, vol. 14, no. 2, pp. 153–162, 2023, doi: 10.1016/j.shaw.2023.03.006.
[9] E. Badoozadeh and A. Babaei-Pouya, “Evaluating Critical Safety and Health Risks by Job Safety Analysis and Analytic Hierarchy Process in Industrial Printing,” Heal. Emergencies Disasters Q., vol. 8, no. 3, pp. 177–184, 2023, doi: 10.32598/hdq.8.3.472.1.
[10] M. Aleahmad and A. Biglar, “Risk Assessment Using Job Safety Analysis (JSA) Method: an industrial case study,” Conf. 18th Iran. Int. Ind. Eng. Iran Inst. Ind. Eng., no. December, 2021.
[11] M. Djunaidi and H. Umami, “Occupational Health and Safety Analysis Using Job Safety Analysis and Hazard Identification Risk Assessment and Risk Control Methods,” E3S Web Conf., vol. 517, pp. 1–9, 2024, doi: 10.1051/e3sconf/202451715003.
[12] E. Albrechtsen, I. Solberg, and E. Svensli, “The application and benefits of job safety analysis,” Saf. Sci., vol. 113, no. October 2018, pp. 425–437, 2019, doi: 10.1016/j.ssci.2018.12.007.
[13] R. T. Andry, “Safety Management Systems in the Industrial Sector,” Saf. Sci, vol. 45, n, 2021.
[14] S. R. Widodo, “Industrial Safety Standards in Electrical Assembly Manufacturing,” Ind. Saf. J., vol. 10, n, 2021.
[15] M. A. R. and F. Wulandari, “Evaluation of Electrical Safety Management: Case Study of PT. XYZ,” J. Jurmatis, vol. 8, no, 2022.
[16] et al Hidayatullah, F. D., “Machine Failure and Safety Protocols: Lessons from Electrical Assembly,” J. Eng. Saf, vol. 33, n, 2023.
[17] A. R. and F. Sulaiman, “Development of Risk Assessment Models for Electrical Panel Production,” J. Int. J. Eng. Res, vol. 34, n, 2019.
[18] I. H. N. and R. Suryanto, “Job Safety Analysis for Electrical Manufacturing: A Systematic Review,” J. Saf. Tech, vol. 24, n, 2020.
[19] M. T. Y. and A. Asnawi, “Reducing Electrical Risk through Improved Job Safety Analysis in High-Risk Manufacturing,” J. Ind. Eng. Manag, vol. 32, n, 2020.
[20] F. W. and A. Sutanto, “Evaluation of Safety Protocols in High-Risk Electrical Manufacturing,” Int. J. Eng. Manag, vol. 30, n, 2022.
[21] P. A. Gunarso, “Fire Hazard Management in Electrical Manufacturing Industries,” J. Ind. Saf., vol. 12, n, 2021.
[22] S. P. Hadjar, “Workplace Risk Assessment Using Job Safety Analysis in Electrical Assembly Line,” Ind. Eng. Manag. Rev, vol. 23, n, 2021.
[23] T. L. Prakoso, “Evaluating the Effectiveness of Personal Protective Equipment in Electrical Panel Production,” J. Saf. Eng, vol. 20, n, 2020.
[24] S. R. Mahendro, “Risk Mitigation Measures in Electrical Manufacturing Safety,” vol. 27, n, 2021.
[25] R. G. Omen, “Assessment of Electrical Safety Management in Panel Production,” J. Ind. Eng. Jpn, vol. 40, n, 2019.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Muhammad Adam Kemal Atthariq, Kusnadi Kusnadi, Asep Erik Nugraha
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Information regarding Copyright and Licensing at JATI UNIK as follows:
- Licensed Use of Non - Commercial Articles will be governed by the Creative Commons Attribution license, which is featured on the Creative Commons Attribution Non-Commercial Share A Like 4.0 International License.
- The author guarantees that the articles published through JATI UNIK are original and do not contain statements that violate the law do not violate others' rights are subject to copyright, which is held exclusively by the author and free from the rights of third parties. The author is allowed to quote from various sources used for research and not to harm any party.
- JATI UNIK disseminates articles published with the rules set by Creative Commons. UNIK JATI license allows users to copy, distribute, display, and work for non-commercial purposes. Users also need to connect authors and JATI UNIK with the distribution of articles in journals.
- The Author rights, namely copyrights, ownership rights, patents, rights to use the substance of articles in the future, rights to reproduce articles for personal purposes and not to be traded, rights to conduct personal archives, rights to contract used for the non-exclusive distribution of articles published in the form a book and acknowledge the initial publication of the article originating from JATI UNIK.
- Suppose articles published by the author through JATI UNIK are compiled with other authors. In that case, it is necessary to create a form containing the authority of all authors involved in the article's production by including the agreement agreed upon by all authors in the article.
- The next point is, the agreement can be terminated if the author or JATI UNIK violates the agreement and cannot make repairs to the customer within a maximum of 2 months after being given information asking for the violation to be corrected. If there is no violation of the agreement, the license will automatically terminate and affect UNIQUE JATI UNIK.
- Regarding royalties, so far, if it is following applicable legal regulations, the author will waive his right to collect royalties on articles that have been licensed by JATI UNIK.
- In publishing the article, the editorial process is successful. JATI UNIK will continue it. JATI UNIK has the right to adjust articles related to punctuation, spelling, capital letters, references used, and usage adapted to JATI UNIK. The author acknowledges that the article can be published and accessed free of charge by the public.
Deprecated: json_decode(): Passing null to parameter #1 ($json) of type string is deprecated in /home/ojs.unik-kediri.ac.id/public_html/plugins/generic/citations/CitationsPlugin.php on line 68
