Penerapan IoT untuk Deteksi Dini Kebocoran CO₂ gunaMendukung Efisiensi di Seksi Welding
DOI:
https://doi.org/10.30737/jatiunik.v10i1.8035Keywords:
DSRM, Deteksi dini, IoT, Kebocoran CO₂, WeldingAbstract
CO₂ leakage during Gas Metal Arc Welding (GMAW) can waste gas, disrupt welding stability, and increase operational safety risks. Monitoring in the Welding Section still relies on direct inspection, so rising CO₂ concentrations, particularly during off-shift periods, may not be identified early. This study develops an Internet of Things (IoT)-based system for continuous CO₂ monitoring and early warning using Design Science Research Methodology (DSRM). The system integrates an NDIR MH-Z19B sensor, ESP32, MQTT, a web dashboard, alarms, Telegram notifications, incident history, and repair logs. Historical records show 99 CO₂ supply incidents from February 2023 to November 2025, with Station Rear 2 recording the most incidents (32). In 2025, 35 weekend gas-reduction incidents represented an estimated material loss of 7,808,800 g, equivalent to IDR 39,044,000. Prototype tests showed a detection range of 40–180 cm, a detection rate of 100% (45/45), and mean data-processing latency of 0.668 s. User Acceptance Testing (UAT) with six respondents yielded overall acceptance of 90.48%. The system may support continuous monitoring and early warning of increased CO₂ concentrations in the Welding Section.References
[1] M. Soori, B. Arezoo, and R. Dastres, “Internet of things for smart factories in industry 4.0, a review,” Internet of Things and Cyber-Physical Systems, vol. 3, pp. 192–204, 2023, doi: 10.1016/j.iotcps.2023.04.006.
[2] Y. Cheng, R. Yu, Q. Zhou, H. Chen, W. Yuan, and Y. Zhang, “Real-time sensing of gas metal arc welding process – A literature review and analysis,” Journal of Manufacturing Processes, vol. 70, pp. 452–469, 2021, doi: 10.1016/j.jmapro.2021.08.058.
[3] M. J. Marquez-Zepeda, I. Santos-Ruiz, E.-J. Pérez-Pérez, A. Navarro-Díaz, and J.-A. Delgado- Aguiñaga, “Internet-of-Things-Based CO₂ Monitoring and Forecasting System for Indoor Air Quality Management,” Mathematical and Computational Applications, vol. 30, no. 2, p. 36, 2025, doi: 10.3390/mca30020036.
[4] A. Mota, C. Serôdio, A. Briga-Sá, and A. Valente, “Implementation of an Internet of Things Architecture to Monitor Indoor Air Quality: A Case Study During Sleep Periods,” Sensors, vol. 25, no. 6, p. 1683, 2025, doi: 10.3390/s25061683.
[5] K. Cahyari, D. T. Ashilah, M. D. Cahyani, and R. A. Ula, “Evaluating the Internet of Things Platform for CO₂ Monitoring in Sugar Refineries,” IPTEK The Journal of Engineering, vol. 10, no. 3, p. 260, 2024, doi: 10.12962/j23378557.v10i3.a21584.
[6] A. Daerobi, A. Multi, and M. R. T. Siregar, “Rancang Bangun Sistem Pemantauan dan Pengendali Kualitas Udara Pada Aplikasi Welding Habitat Proses Welding Pipeline Sistem Dengan Data Logger,” Sainstech: Jurnal Penelitian dan Pengkajian Sains dan Teknologi, vol. 33, no. 3, pp. 61–83, 2023, doi: 10.37277/stch.v33i3.1738.
[7] N. A. Z. Putri, U. Ristian, and R. Hidayati, “Sistem Deteksi Dan Pemantauan Kualitas Udara Dalam Ruangan Berbasis IoT,” JUPITER: Jurnal Penelitian Ilmu dan Teknologi Komputer, vol. 16, no. 2, pp. 457–468, 2024, doi: 10.5281/zenodo.12592552.
[8] K. I. Ko and M. H. Lee, “MQTT-Based Architecture for Real-Time Data Collection and Anomaly Detection in Smart Livestock Housing,” Sensors, vol. 25, no. 23, p. 7186, 2025, doi: 10.3390/s25237186.
[9] H. Budianto and B. Sumanto, “Perancangan Sistem Monitoring Kualitas Udara dalam Ruangan Berbasis Internet of Things,” Jurnal Listrik, Instrumentasi, dan Elektronika Terapan, vol. 5, no. 1, p. 9, 2024, doi: 10.22146/juliet.v5i1.87423.
[10] R. Curcoll, J.-A. Morguí, A. Kamnang, L. Cañas, A. Vargas, and C. Grossi, “Metrology for low-cost CO₂ sensors applications: The case of a steady-state through-flow chamber for CO₂ fluxes observations,” Atmospheric Measurement Techniques, vol. 15, pp. 2807–2818, 2022, doi: 10.5194/amt-15-2807-2022.
[11] A. Abdullah, M. Iwan, M. Maryogi, and R. Faizal, “System Testing and Performance Evaluation of an MQTT-Based IoT Monitoring System for Crop Cultivation,” ELKHA: Jurnal Teknik Elektro, vol. 18, no. 1, pp. 10–17, 2026, doi: 10.26418/elkha.98306.
[12] H. Zhang, J. Zhang, R. Wang, Y. Huang, M. Zhang, X. Shang, and C. Gao, “Smart Carbon Monitoring Platform under IoT-Cloud Architecture for Small Cities in B5G,” Wireless Networks, vol. 30, no. 5, pp. 3837–3853, 2024, doi: 10.1007/s11276-021-02756- 2.
[13] E. Prayitno, N. Fahmi, M. U. H. Al Rasyid, and A. Sudarsono, “An Implementation of IoT for Environmental Monitoring and Its Analysis Using k-NN Algorithm,” TELKOMNIKA (Telecommunication, Computing, Electronics and Control), vol. 19, no. 6, pp. 1811–1819, 2021, doi: 10.12928/telkomnika.v19i6.15724.
[14] L. T. Permana, N. Qomariyah, and R. Wirawan, “Rancang Bangun Sistem Pendeteksi Penyerapan Gas Karbondioksida (CO₂) Oleh Tumbuhan Menggunakan Sensor MH-Z19,” Indonesian Physical Review, vol. 4, no. 2, pp. 86–94, 2021, doi: 10.29303/ipr.v4i2.81.
[15] E. Maltezos, K. Petousakis, A. Dadoukis, L. Karagiannidis, E. Ouzounoglou, M. Krommyda, G. Hadjipavlis, and A. Amditis, “A Smart Building Fire and Gas Leakage Alert System with Edge Computing and NG112 Emergency Call Capabilities,” Information, vol. 13, no. 4, p. 164, 2022, doi: 10.3390/info13040164.
[16] A. Setiawan, S. Sulistiyanto, C. A. Riyanto, and G. A. Wiguna, “Desain sistem pemantauan kualitas udara jangka panjang berbasis Internet of Things,” Jurnal Teras Fisika, vol. 7, no. 1, pp. 24– 29, 2024, doi: 10.20884/1.jtf.2024.7.1.11859.
[17] G. Tejaleksono, D. Notosudjono, A. R. Machdi, F. Adzikri, and A. U. Rahayu, “Prototype of CO, CO₂, UV Light, Temperature, and Humidity Detection Device Based on IoT and Solar Cells,” Journal of Energy and Electrical Engineering, vol. 5, no. 2, pp. 125– 133, 2024, doi: 10.37058/jeee.v5i2.10321.
[18] A. N. A. Muhid, O. Rahmanto, A. Noor, and Fathurrahmani, “Sistem Early Warning Deteksi Kualitas Udara Berbasis IoT,” Jurnal Informatika dan Rekayasa Elektronik, vol. 7, no. 2, pp. 402– 412, 2024, doi: 10.36595/jire.v7i2.1277.
[19] Y. Alkhalifi, R. Ramadan, R. K. Atmaja, and Ispandi, “Mobile-based Application Development on Admission of New Students with Design Science Research Methodology,” Paradigma - Jurnal Komputer dan Informatika, vol. 26, no. 2, pp. 65–72, 2024, doi: 10.31294/p.v26i2.4765.
[20] M. Linda and R. V. Imbar, “Perancangan Model Referral dengan Pendekatan Design Science Research Methodology,” Jurnal Teknik Informatika dan Sistem Informasi, vol. 10, no. 3, pp. 430– 438, 2024, doi: 10.28932/jutisi.v10i3.9215.
[21] T. Haryanti, N. A. Rakhmawati, and A. P. Subriadi, “Measuring the digital transformation maturity level independently with the design science research methodology,” Systems Engineering, vol. 27, no. 1, pp. 159–176, 2024, doi: 10.1002/sys.21714.
[22] N. A. C. Mulia and R. Rochmoeljati, “Pengendalian Kualitas Pengelasan Menggunakan Metode Statistical Quality Control (SQC) dan Failure Mode Effect Analysis (FMEA) di PT. PAL Indonesia,” JUMINTEN, vol. 2, no. 6, pp. 60–71, 2021, doi: 10.33005/juminten.v2i6.346.
[23] S. O. Baktiar, S. R. Widodo, and A. Y. Tripariyanto, “Penerapan Metode DMAIC untuk Mengurangi Cacat Hasil Pengelasan di PT. X,” JATI UNIK, vol. 5, no. 1, pp. 16–27, 2021, doi: 10.30737/jatiunik.v5i1.1973.
[24] M. Z. Mubarok and T. Machfuroh, “Pengendalian Kualitas Pengelasan Baja SS400 untuk Ducting pada PT. XYZ dengan Metode SQC,” G-Tech: Jurnal Teknologi Terapan, vol. 8, no. 4, pp. 2178–2189, 2024, doi: 10.70609/gtech.v8i4.4776.
[25] B. Adiguna, M. A. Kartawidjaja, and R. Sukwadi, “Optimasi Kualitas Pengelasan Dinding Tangki: Pendekatan Six Sigma dan FMEA (Studi Kasus: Cleaning dan Over Haul Tangki PT. Pertamina RU III),” Integrasi: Jurnal Ilmiah Teknik Industri, vol. 9, no. 2, pp. 148–161, 2024, doi: 10.32502/integrasi.v9i2.206.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Setiawan, Rina Noviana

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Information regarding Copyright and Licensing at JATI UNIK as follows:
- Licensed Use of Non - Commercial Articles will be governed by the Creative Commons Attribution license, which is featured on the Creative Commons Attribution Non-Commercial Share A Like 4.0 International License.
- The author guarantees that the articles published through JATI UNIK are original and do not contain statements that violate the law do not violate others' rights are subject to copyright, which is held exclusively by the author and free from the rights of third parties. The author is allowed to quote from various sources used for research and not to harm any party.
- JATI UNIK disseminates articles published with the rules set by Creative Commons. UNIK JATI license allows users to copy, distribute, display, and work for non-commercial purposes. Users also need to connect authors and JATI UNIK with the distribution of articles in journals.
- The Author rights, namely copyrights, ownership rights, patents, rights to use the substance of articles in the future, rights to reproduce articles for personal purposes and not to be traded, rights to conduct personal archives, rights to contract used for the non-exclusive distribution of articles published in the form a book and acknowledge the initial publication of the article originating from JATI UNIK.
- Suppose articles published by the author through JATI UNIK are compiled with other authors. In that case, it is necessary to create a form containing the authority of all authors involved in the article's production by including the agreement agreed upon by all authors in the article.
- The next point is, the agreement can be terminated if the author or JATI UNIK violates the agreement and cannot make repairs to the customer within a maximum of 2 months after being given information asking for the violation to be corrected. If there is no violation of the agreement, the license will automatically terminate and affect UNIQUE JATI UNIK.
- Regarding royalties, so far, if it is following applicable legal regulations, the author will waive his right to collect royalties on articles that have been licensed by JATI UNIK.
- In publishing the article, the editorial process is successful. JATI UNIK will continue it. JATI UNIK has the right to adjust articles related to punctuation, spelling, capital letters, references used, and usage adapted to JATI UNIK. The author acknowledges that the article can be published and accessed free of charge by the public.









