Studi Perencanaan Perkerasan Lentur Dan Rencana Anggaran Biaya (Pada Proyek Ruas Jalan Karangtalun – Kalidawir Kabupaten Tulungagung)
DOI:
https://doi.org/10.30737/jurmateks.v3i2.1187Keywords:
Flexible Pavement, Geometric, RAB, 2017 Design Manual MethodAbstract
Road pavement is a major component in supporting the smooth running of land transportation so that it can be accessed comfortably and safely by road users. Road pavement, according to its type, is divided into three types, namely flexible pavement, rigid pavement, and composite pavement. On flexible pavements, there are several methods used to determine the thickness of the pavement in the initial plan. The method used as a reference is the 2017 Design Manual Method, and the calculation of the RAB refers to the Basic Unit Price Analysis in 2019. This study aims to obtain good quality flexible pavement but at a low cost in terms of the 2017 Design Manual method and analysis calculations and The price of the basic unit (RAB) in 2019. From the calculation of the pavement thickness of each layer, namely the top layer of 5 cm, the middle layer of 20 cm, and the bottom layer of 15 cm, it is known that the cost required to carry out the construction of the pavement is Rp. 73,342,707,500.00.
Perkerasan jalan adalah komponen utama dalam menunjang lancarnya suatu transportasi darat, sehingga jalan dapat diakses dengan mudah, nyaman dan aman oleh pengguna jalan. Perkerasan jalan menurut jenisnya dibagi menjadi tiga yaitu perkerasan lentur, perkerasan kaku dan perkerasan komposit. Pada perkerasan lentur terdapat beberapa metode yang digunakan untuk menentukan tebal perkerasan perencanaan awal. Adapun metode yang dipakai sebagai acuan adalah Metode Manual Desain 2017 serta perhitungan RAB mengacu dengan Analisa Harga Satuan Dasar pada tahun 2019. Tujuan dari penelitian ini adalah untuk mendapatkan mutu perkerasan lentur yang baik tetapi dengan biaya yang murah ditinjau dari metode Manual Desain 2017 serta perhitungan Analisa Harga Satuan Dasar (RAB) pada tahun 2019. Dari hasil perhitungan tebal perkerasan masing-masing lapisan yaitu lapis atas 5 cm, lapis tengah 20 cm, dan lapis bawah 15 cm diketahui biaya yang diperlukan guna melaksanakan pembangunan perkerasan jalan tersebut sebesar Rp. 73.342.707.500,00.
References
X. Yang, Z. You, J. Hiller, and D. Watkins, “Sensitivity of flexible pavement design to Michigan’s climatic inputs using pavement ME design,†Int. J. Pavement Eng., vol. 18, no. 7, pp. 622–632, 2017.
A. D. Limantara, S. W. Winarto, and S. W. Mudjanarko, “SISTEM PAKAR PEMILIHAN MODEL PERBAIKAN PERKERASAN LENTURBERDASARKAN INDEKS KONDISI PERKERASAN (PCI),†Pros. Semnastek, 2017.
T. Alenezi, J. Norambuena-Contreras, A. Dawson, and A. Garcia, “A novel type cold mix pavement material made with calcium-alginate and aggregates,†J. Clean. Prod., vol. 212, pp. 37–45, 2019, doi: 10.1016/j.jclepro.2018.11.297.
A. I. Candra, S. W. Mudjanarko, and A. D. Limantara, “Manajemen Data Lalu Lintas Kendaraan Berbasis Sistem Internet Cerdas Kadiri,†Semnastek, vol. 4, no. 2, pp. 1–2, 2017.
C. Zhang, H. Wang, Z. You, and X. Yang, “Compaction characteristics of asphalt mixture with different gradation type through Superpave Gyratory Compaction and X-Ray CT Scanning,†Constr. Build. Mater., vol. 129, pp. 243–255, 2016, doi: 10.1016/j.conbuildmat.2016.10.098.
D. J. B. Marga, “Departemen Pekerjaan Umum,†Man. Kapasitas Jalan Indones. (MKJI 1997), Jakarta, 1997.
F. Russo, S. A. Biancardo, A. Formisano, and G. Dell’Acqua, “Predicting percent air voids content in compacted bituminous hot mixture specimens by varying the energy laboratory compaction and the bulk density assessment method,†Constr. Build. Mater., vol. 164, pp. 508–524, 2018, doi: 10.1016/j.conbuildmat.2017.12.174.
D. D. B. Marga, “Manual Kapasitas Jalan Indonesia (MKJI),†vol. 7802112, no. 264, 1997.
S. 03-1737-1989, “Tata Cara Pelaksanaan Lapis Aspal Beton (Laston) untuk Jalan Raya,†p. 16, 1989.
A. Andriansyah, P. Pratomo, and H. Ali, “Optimalisasi Tebal Perkerasan Pada Pekerjaan Pelebaran Jalan dengan Metode MDPJ 02/M/BM/2013 dan Pt T-01-2002-B,†J. Rekayasa Sipil dan Desain, vol. 4, no. 1, pp. 113–126, 2016.
D. P. U. SKBI–2.3. 26. 1987, UDC: 625.73 (02), “Petunjuk Perencanaan Komponen Tebal Perkerasan Lentur Jalan Raya Dengan Metode Analisa Jalan,†Peratur. Perenc. Geom. Jalan Raya, no. 13, 1970.
M. R. Mohd Hasan, J. E. Hiller, and Z. You, “Effects of mean annual temperature and mean annual precipitation on the performance of flexible pavement using ME design,†Int. J. Pavement Eng., vol. 17, no. 7, pp. 647–658, 2016.
A. Bill et al., “Development of knowledge tables and learning outcomes for an introductory course in transportation engineering,†Transp. Res. Rec., vol. 2211, no. 1, pp. 27–35, 2011.
Dinas Pekerjaan Umum Bina Marga, Tata Cara Perencanaan Geometrik Jalan Antar Kota. Jakarta, 1997.
P. Li and J. He, “Geometric design safety estimation based on tire–road side friction,†Transp. Res. Part C Emerg. Technol., vol. 63, pp. 114–125, 2016.
B. Marga, “Perkerasan Aspal, Spesifikasi Umum Divisi VI Revisi 3.†Jakarta, 2010.
K. D. Hall, D. X. Xiao, and K. C. P. Wang, “Calibration of the Mechanistic–Empirical Pavement Design Guidefor Flexible Pavement Design in Arkansas,†Transp. Res. Rec., vol. 2226, no. 1, pp. 135–141, 2011.
P. Pereira and J. Pais, “Main flexible pavement and mix design methods in Europe and challenges for the development of an European method,†J. Traffic Transp. Eng. (English Ed., vol. 4, no. 4, pp. 316–346, 2017.
E. Gardjito, “STUDY PERENCANAAN GEOMETRIK, PERKERASAN JALAN DAN PERENCANAAN ANGGARAN BIAYA PADA JALAN RAYA KALIDAWIR–Ds. NGUBALAN Kec. KALIDAWIR,†UKaRsT, vol. 1, no. 2, p. 11, 2017.
DEPARTEMEN PEKERJAAN UMUM, “Perencanaan Sistem Drainase Jalan,†2006.
C. Caliendo, “Local calibration and implementation of the mechanistic-empirical pavement design guide for flexible pavement design,†J. Transp. Eng., vol. 138, no. 3, pp. 348–360, 2012.
K. P. Umum and D. J. B. Marga, “Manual Desain Perkerasan Jalan,†Nomor 02/M/BM/2013, 2013.
P. Chakroborty and A. Das, Principles of transportation engineering. PHI Learning Pvt. Ltd., 2017.
J. M. Lutin, F. ITE, and A. L. Kornhauser, “The revolutionary development of self-driving vehicles and implications for the transportation engineering profession,†Cell, vol. 215, pp. 630–4125, 2013.
E. H. Fini, F. Awadallah, M. M. Parast, and T. Abu-Lebdeh, “The impact of project-based learning on improving student learning outcomes of sustainability concepts in transportation engineering courses,†Eur. J. Eng. Educ., vol. 43, no. 3, pp. 473–488, 2018.
A. Badrujaman, “Perencanaan Geometrik Jalan dan Anggaran Biaya Ruas Jalan Cempaka–Wanaraja Kecamatan Garut Kota,†J. Konstr., vol. 14, no. 1, 2016.
E. N. Barmpounakis, E. I. Vlahogianni, and J. C. Golias, “Unmanned Aerial Aircraft Systems for transportation engineering: Current practice and future challenges,†Int. J. Transp. Sci. Technol., vol. 5, no. 3, pp. 111–122, 2016.
A. C. Mujianto, L. C. A. R. Jonathan, and A. Suroso, “EFISIENSI BIAYA PEMBANGUNAN PROYEK JALAN SP RESAK PETUNG PADA PT BANGUN CIPTA KONTRAKTOR,†EKONOMIA, vol. 5, no. 1, pp. 68–73, 2016.
S. Sukarman, Beton Aspal Campuran Panas. Yayasan Obor Indonesia, 2003.
I. Bachtiar, “Rencana dan estimate Real of Cost,†Jakarta Bumi Aksara, 1993.
Downloads
Published
Issue
Section
License
Authors who publish with this journal agree to the following terms:
(1) The copyright of published articles will be transferred to the journal as the publisher of the manuscript. Therefore, the author needs to confirm that the copyright has been managed by the publisher with the Publication Right Form which must be attached when submitting the article.
(2) Publisher of JURMATEKS is Kadiri University.
(3) The copyright follows Creative Commons Attribution-ShareAlike License (CC BY SA): This license allows to Share copy and redistribute the material in any medium or format, Adapt remix, transform, and build upon the material, for any purpose, even commercially.
