Penerapan Kesehatan dan Keselamatan Kerja (K3) di Masa Pandemi Covid-19 pada Proyek Pembangunan Gedung OJK KR. 4 Jawa Timur

Authors

  • Athallah Prawira Bima Nursandah Fakultas Teknik, Universitas 17 Agustus 1945 Surabaya
  • Wateno Oetomo Fakultas Teknik, Universitas 17 Agustus 1945 Surabaya
  • Michella Beatrix Fakultas Teknik, Universitas 17 Agustus 1945 Surabaya

DOI:

https://doi.org/10.30737/jurmateks.v5i2.2923

Keywords:

Covid Pandemic, Multiple Linear Regression, Occupational Health and Safety, Worker Performance

Abstract

The success of a construction is influenced by the performance of workers. Worker performance is influenced by the environment to the existing occupational safety and health system. The Covid pandemic has had an impact on changing the structure of the construction sector, one of which is on workers. These changes are not easily implemented by construction workers. There are several factors that cause it is not easy to apply such as understanding, ability and attitude. The purpose of this study is to analyze the application of occupational health and safety (K3) in the construction project of the OJK KR.4 building, East Java, Surabaya. Data obtained from questionnaires distributed to workers. The data obtained were then analyzed for Validity, Reliability, Normality, and Multiple Linear Regression including the F-Test, Coefficient of Determination, and T-Test. The results showed that the COVID-19 pandemic and OSH behavior had an effect on the implementation of OSH by 74.4% and the remaining 25. 6% influenced by other things. However, the attitude and behavior of K3 became the most dominant among the two variables studied. So that knowing the most influential variables in the implementation of K3 during a pandemic can inform construction organizations and policy makers about aspects to implement preventive measures aimed at protecting construction workers.

References

Y. I. Abu Aisheh, B. A. Tayeh, W. S. Alaloul, and A. Almalki, “Health and safety improvement in construction projects: a lean construction approach,†Int. J. Occup. Saf. Ergon., vol. 0, no. 0, pp. 1–13, 2021, doi: 10.1080/10803548.2021.1942648.

M. Alkaissy, M. Arashpour, B. Ashuri, Y. Bai, and R. Hosseini, “Safety management in construction: 20 years of risk modeling,†Saf. Sci., vol. 129, no. May, p. 104805, 2020, doi: 10.1016/j.ssci.2020.104805.

M. W. Khan, Y. Ali, F. De Felice, and A. Petrillo, “Occupational health and safety in construction industry in Pakistan using modified-SIRA method,†Saf. Sci., vol. 118, no. March, pp. 109–118, 2019, doi: 10.1016/j.ssci.2019.05.001.

C. Ju, S. Rowlinson, and Y. Ning, “Contractors’ strategic responses to voluntary OHS programmes: An institutional perspective,†Saf. Sci., vol. 105, no. December 2017, pp. 22–31, 2018, doi: 10.1016/j.ssci.2018.01.011.

F. J. P. Sitorus, G. W. Subagyo, and R. Y. Nikijuluw, “Cyclist Safety and Comfort of Bicycle Facilities in the Bintaro Jaya During Covid-19 Pandemic Using Bicycle Level of Service,†U KaRsT, vol. 6, no. 1, pp. 57–71, 2022, doi: http://dx.doi.org/10.30737/ukarst.v6i1.2393.

C. Kamiludin and A. F. V Roy, “Identifying The Impact Of The COVID-19 Pandemic On The Indonesian Construction Sector Using The Exploratory Factor Analysis (EFA),†U KaRsT, vol. 6, no. 1, pp. 16–30, 2022, doi: http://dx.doi.org/10.30737/ukarst.v6i1.2147.

F. Cruz Rios, W. K. Chong, and D. Grau, “The need for detailed gender-specific occupational safety analysis,†J. Safety Res., vol. 62, pp. 53–62, 2017, doi: 10.1016/j.jsr.2017.06.002.

A. F. Trillo-Cabello, J. A. Carrillo-Castrillo, and J. C. Rubio-Romero, “Perception of risk in construction. Exploring the factors that influence experts in occupational health and safety,†Saf. Sci., vol. 133, no. November 2019, p. 104990, 2021, doi: 10.1016/j.ssci.2020.104990.

S. Winge, E. Albrechtsen, and J. Arnesen, “A comparative analysis of safety management and safety performance in twelve construction projects,†J. Safety Res., vol. 71, no. November, pp. 139–152, 2019, doi: 10.1016/j.jsr.2019.09.015.

F. Handoko, M. Wijayaningtyas, I. H. A. Kusuma, S. Hidayat, A. Ismail, and Z. Abdullah, “The occupational health and safety effect on road construction worker performance,†Civ. Eng. Archit., vol. 8, no. 5, pp. 750–759, 2020, doi: 10.13189/cea.2020.080502.

I. W. G. E. Triswandana and N. K. Armaeni, “Penilaian Risiko K3 Konstruksi Dengan Metode Hirarc,†U KaRsT, vol. 4, no. 1, pp. 96–108, 2020, doi: http://dx.doi.org/10.30737/ukarst.v4i1.788.

D. Benny and D. Jaishree, “Construction safety management and accident control measures,†Int. J. Civ. Eng. Technol., vol. 8, no. 4, pp. 611–617, 2017.

M. Ardiansyah, A. Rozandi, M. Hidayat, and D. Purwanto, “Implementasi Sistem Manajemen K3 Saat Pandemi COVID-19 Pada Proyek Pedestrian Dago Kota Sukabumi,†J. TESLINK Tek. Sipil dan Lingkung., vol. 4, no. 6, pp. 73–85, 2022, doi: https://doi.org/10.52005/teslink.v4i1.112.

F. Fassa and S. Rostiyanti, “Pengaruh pelatihan k3 terhadap perilaku tenaga kerja konstruksi dalam bekerja secara aman di proyek,†J. Archit. Innov., vol. 4, no. 1, pp. 1–14, 2020, doi: https://doi.org/10.36766/aij.v4i1.96.

X. Zhang and S. R. Mohandes, “Occupational Health and Safety in green building construction projects: A holistic Z-numbers-based risk management framework,†J. Clean. Prod., vol. 275, p. 122788, 2020, doi: 10.1016/j.jclepro.2020.122788.

H. B. Başağa, B. A. Temel, M. Atasoy, and İ. Yıldırım, “A study on the effectiveness of occupational health and safety trainings of construction workers in Turkey,†Saf. Sci., vol. 110, no. October 2017, pp. 344–354, 2018, doi: 10.1016/j.ssci.2018.09.002.

S. Susanto, Hendy, Sumargono, B. Winarno, and A. I. Candra, “Measurement Of Occupational Safety And Health Risk Levels Of Kadiri University LP3M Building,†U KaRsT, vol. 4, no. 2, pp. 126–141, 2020, doi: http://dx.doi.org/10.30737/ukarst.v4i2.782.

M. Yandra, M. Giatman, F. Rifwan, and F. Fahrul, “Analisis Korelasi Komunikasi K3 Eksternal Dengan Pada Proyek Pembangunan Kampus Iii Uin,†J. Civ. Eng. Vocat. Educ., vol. 9, no. 1, pp. 88–95, 2022, doi: https://doi.org/10.24036/cived.v9i1.117588.

L. W. Saunders, B. M. Kleiner, A. P. McCoy, K. P. Ellis, T. Smith-Jackson, and C. Wernz, “Developing an inter-organizational safety climate instrument for the construction industry,†Saf. Sci., vol. 98, pp. 17–24, 2017, doi: 10.1016/j.ssci.2017.04.003.

F. Tamim and A. Ismail, “Analisis Manajemen Risiko dan Pengendalian Kesehatan dan Keselamatan Kerja (K3) pada Pekerjaan Power House,†J. Konstr., vol. 18, no. 1, pp. 1–10, 2020, doi: 10.33364/konstruksi/v.18-1.772.

S. Bondroini, F. Kurniawan, and J. Tistogondo, “Implementation of Occupational Health and Safety Management Systems (SMK3) in Development Projects Mall and Apartments ‘X’ in Surabaya,†ADRI Int. J. Civ. Eng., vol. 5, no. 2, pp. 39–47, 2022, doi: 10.29138/aijce.v5i2.7.

A. B. Siswanto, M. A. Salim, and D. Ramawati, “Analisis Penerapan K3 Masa Pandemi Covid 19 Pada Proyek Dermaga Samudera Semarang,†Teras J., vol. 12, no. 1, p. 229, 2022, doi: 10.29103/tj.v12i1.647.

H. Sinaga, E. H. Manurung, K. Sawito, and C. Sitindaon, “Pengaruh Keselamatan Dan Kesehatan Kerja ( K3 ) Pada Keberhasilan Sebuah Proyek Konstruksi ( Studi Kasus : Gedung The Stature Jakarta ),†J. Rekayasa Konstr. Mek. Sipil, vol. 5, no. 1, pp. 41–49, 2022, doi: https://doi.org/10.54367/jrkms.v5i1.1803.

M. Fauzi, S. Setyawan, and W. Irfian, “Analisis Pengaruh Motivasi Kerja, Disiplin Kerja, dan Penerapan Keselamatan dan Kesehatan Kerja (K3) Terhadap Hasil Kinerja Karyawan,†J. Econ. Insight, vol. 1, no. 1, pp. 37–51, 2022.

W. H. Ladimu, E. R. Ahadian, M. T. Y. Saputra, N. Nagu, and E. Tuhuteru, “Analisis Pengaruh Penerapan Keselamatan dan Kesehatan Kerja (K3) Terhadap Kinerja Pekerja Pada Proyek Konstruksi Pembangunan Gedung di Kota Ternate,†Clapeyron J. Ilm. Tek. Sipil, vol. 3, no. 1, pp. 8–15, 2022, doi: http://dx.doi.org/10.33387/clapeyron.v3i1.4591.

Downloads

PlumX Metrics

Published

2022-10-24

Issue

Vol. 5 No. 2 (2022): DECEMBER

Section

Articles

License

Authors who publish with this journal agree to the following terms:

(1) The copyright of published articles will be transferred to the journal as the publisher of the manuscript. Therefore, the author needs to confirm that the copyright has been managed by the publisher with the Publication Right Form which must be attached when submitting the article.

(2) Publisher of JURMATEKS is Kadiri University.

(3) The copyright follows Creative Commons Attribution-ShareAlike License (CC BY SA): This license allows to Share copy and redistribute the material in any medium or format, Adapt remix, transform, and build upon the material, for any purpose, even commercially.